La description
Basic features:    1, the oxygen probe detector
built-in high-capacity lithium battery, can work long hours; fully
charged can work more than *0 hours (the factory). Because it is a
lithium battery, please try not to over discharge. Please note that
the proper use of the charger, the charger voltage can not be
higher than 4.2V.     2, the use of
digital tube display content.     3, the
charger green light indicates charging is completed, the more red
light indicates that power is low.     4,
the current can be detected launch tube 2 feet BCI probe
    5, more features continue to upgrade
    6, more than SKX****0A-type detection
function more  Operation and code description Detector test
after boot shows "***-" to enter standby mode. Select the "five
core" is carried out five core probe detection Select the
"six-core" is a six-core probe detection
            ÂÂ
When starting the test, the message "...." means being detected,
please wait for test results After detection is complete, if the
probe is completely normal, it shows "good", When an error is
detected, the display with "E" at the beginning of an error code
Priority levels are as follows: The first priority of disconnection
Second priority circuit Third priority receiver tube detection The
fourth priority transmission pipe detection, IR former RED in the
post  Error codes are as follows:  E *1 when the
display is disconnected, check the following 1, the probe cable is
not connected to Remo head was disconnected 2, Remo head-end
connection is normal, but the line in question 3, the probe
internal problems  E *2 When the short circuit, check the
following 1, is connected to the head of the line if there Remo
shorted state 2, Remo head-end connection is normal, but the line
in question 3, the probe internal problems  E *3 In this
case, check the following 1, the probe's launch tube IR damage 2,
the probe's launch tube IR injury, but the brightness diminished
 E *4 In this case, check the following 1, the probe's
launch tube RED damage 2, the probe's launch tube RED injury, but
diminished brightness  E *5 receiver tube or bad, please
check the following 1, the probe tube is damaged reception 2, the
probe receiving tube aging   E *9 The instrument does
not recognize the type of probe
| Pays: |
China |
| N ° de modèle: |
SKX-1000B
|
| Prix FOB: |
190 / Unit (Negotiable)
Obtenir le dernier prix
|
| Localité: |
Xuzhou, Jiangsu, China |
| Prix de commande minimale: |
190 per Unit |
| Commande minimale: |
1 Unit |
| Packaging Detail: |
Bubble wrap drop resistance |
| Heure de livraison: |
1-2 days can be shipped |
| Capacité de Fournir: |
198 Unit per Week |
| Payment Type: |
Western Union |
| Groupe de produits : |
ECG class auxiliary testing equipment
|
