Omeroglu Metallurgy Co.Ltd.

It consists of a hole, usually round or oval, and a tapered plug, usually a disk shape on the end of a shaft also called a valve stem. The portion of

Gearbox for agricultural machines, Dimensions, material and machining process can be chance and arrange according to the customers request.

Valve Body and other partsDimensions, material can be chance and arrange according to the customers request.

Differential for motors, Dimensions, material and machining process can be chance and arrange according to the customers request.

A bearing is a machine element that constrains relative motion to only the desired motion, and reduces friction between moving parts.

A gear or cogwheel is a rotating machine part having cut teeth, or cogs, which mesh with another toothed part to transmit torque, in most cases with t

A gearboxis a rotating machine part having cut teeth, or cogs, which mesh with another toothed part to transmit torque, in most cases with teeth on th

A transmission is a machine that consists of a power source and a power transmission system, which provides controlled application of the power.

A bearing is a machine element that constrains relative motion to only the desired motion, and reduces friction between moving parts.

A stator fastening arrangement for a flat elevator motor may include a stator core, a winding, and a rotor fitted in conjunction with the stator. The

A stator fastening arrangement for a flat elevator motor may include a stator core, a winding, and a rotor fitted in conjunction with the stator.

A bonnet acts as a cover on the valve body. It is commonly semi-permanently screwed into the valve body or bolted onto it. During manufacture of the v

A bonnet acts as a cover on the valve body. It is commonly semi-permanently screwed into the valve body or bolted onto it. During manufacture of the v

A bonnet acts as a cover on the valve body. It is commonly semi-permanently screwed into the valve body or bolted onto it. During manufacture of the v

A gear or cogwheel is a rotating machine part having cut teeth, or cogs, which mesh with another toothed part to transmit torque in most cases with te

A gear or cogwheel is a rotating machine part having cut teeth, or cogs, which mesh with another toothed part to transmit torque in most cases with te

A flywheel is a rotating mechanical device that is used to store rotational energy. Flywheels have an inertia called the moment of inertia and thus re

A clamp is a fastening device to hold or secure objects tightly together to prevent movement or separation through the application of inward pressure.

Strip bearing wheel is the timekeeping device used in mechanical watches and some clocks, analogous to the pendulum in a pendulum clock. It is a weigh

Roll forming, also spelled roll forming, is a type of rolling involving the continuous bending of a long strip of sheet metal (typically coiled steel)

Stretch Forming is a manufacturing process in which sheet, extrusions, or formed profiles are wrapped around dies to make parts into simple or complex

The relationship between the rotation of the camshaft and the rotation of the crankshaft is of critical importance. Since the valves control the flow

A coupling is a device used to connect two shafts together at their ends for the purpose of transmitting power. Couplings do not normally allow discon

An orthogonal instruction set. Mostly single-cycle execution. Enhanced power-saving design. Its uses in the machines and heavy machines likes tractors

A belt is a loop of flexible material used to link two or more rotating shafts mechanically, most often parallel. Belts may be used as a source of mot

Signs of a worn wheel hub bearing vary in severity and some may be difficult to detect, leading to damage before corrective action can be taken. A Whe

A gear or cogwheel is a rotating machine part having cut teeth, or cogs, which mesh with another toothed part to transmit torque. Geared devices can c