❯

BOOK A CALL

Book Call On Your Favorite Time

I'm a Buyer I'm a Supplier

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services

Silicone Rubber Mold Making Liquid To Make Jewelry Mold

Prix FOB

Obtenir le dernier prix

6.2 ~ 8.9 / Kilogram ( Negotiable )

1 Kilogram Minimum Order

Pays:

China

N Â° de modÃ¨le:

DC-A15

Prix FOB:

6.2 ~ 8.9 / Kilogram ( Negotiable )(Negotiable) Obtenir le dernier prix

LocalitÃ©:

china

Prix de commande minimale:

6.2 per Kilogram

Commande minimale:

1 Kilogram

Packaging Detail:

1KG/3KG/5KG/10KG/20KG/25KG/200KG/drum vacuum packing for part A + Tin Catalyst (part B)

Heure de livraison:

3-5days after get payment

Capacité de Fournir:

8 Ton per Day

Payment Type:

Groupe de produits :

Contacter maintenant

Shenzhen Zhihua Chemical Co., Ltd

China

Membre gratuit

Personne Ã contacter Mr. john

3/F,No.16,Tongqing Road,Tongle Community,Baolong Street,Longgang District, Shenzhen, Guangdong

Contacter maintenant

Color:Translucent or customized color
MOQ:50kg
Shelf life:12months
cure time:3-5 hours
Mix ratio:1:1/10:1
Type:platinum cure silicone

La description

Application
DC-A15 silicone Rubber is mainly used for making molds of concrete stone,GRC,polyurethane products ; wax, candle decoration; rapid prototyping and tire molds; chocolate, candy and similar products molding.

Description
DC-A15 is a kind of two part silicone rubber in addition cure or platinum cure type with mixing ratio of 1:1 or *0:1.It can cure at room temperature as well as under heat. Its a kind of food grade silicone which has got the United States FDA certification. And mainly used for mold making.

Characteristics

An exceptional fluidity and good operability, easy todemold

Aging resistance, high temperature resistance

Environmentally, food-grade, FDA Certification.

Good tensile and tear strength

Outstanding bubble releasing

Very Low shrinkage

Non-deformation

Operation Instructions

Step 1: prepare the original molds

Prepare an perfect original mold and clean it totally before operation.

Notes:Make sure your original molds and operation tool were cleaned up totally to avoid uncured problem .

Step 2:

1.Weigh the two part exactly by electronic weight. If any part not in exactly weight, it may cause changing of hardness, or even cause uncured problem.

2.Mix part A and part B evenly. Otherwise the silicon rubber will be partly solidified and this will give birth to difficulties in your final operation. Whats more, the finished molds will meet a short life. All of these will cause a waste of silicone rubber.

Step 3: Vacuum pumping

Without exception, this step takes less than *0 minutes. Otherwise, it will causecross linking reaction, and no more further steps will be available.

Step 4: Pouring casting or Brush operation

Notes:1. For simple pattern products we suggest use pouring operation way, which will be very easy to operate and demould. Pourable silicone require low viscosity which will be easy to flow smoothly and easy to de-air .

2.For delicate pattern products we suggest use brushing operation way, which can copy the pattern exactly. Brushable silicone require high viscosity which wont be easy to flow away and easy to brush .

3.We suggest to set the silicone mold for another *2 hours after demould before you put it into a large production .

Pays:	China
N Â° de modÃ¨le:	DC-A15
Prix FOB:	6.2 ~ 8.9 / Kilogram ( Negotiable ) (Negotiable) Obtenir le dernier prix
LocalitÃ©:	china
Prix de commande minimale:	6.2 per Kilogram
Commande minimale:	1 Kilogram
Packaging Detail:	1KG/3KG/5KG/10KG/20KG/25KG/200KG/drum vacuum packing for part A + Tin Catalyst (part B)
Heure de livraison:	3-5days after get payment
Capacité de Fournir:	8 Ton per Day
Payment Type:	-
Groupe de produits :	-