Prix FOB
Obtenir le dernier prix8.5 ~ 11.5 USD / Kilogram ( Negotiable )
|1 Kilogram Minimum Order
Pays:
China
N ° de modèle:
DC-A15
Prix FOB:
8.5 ~ 11.5 USD / Kilogram ( Negotiable ) Obtenir le dernier prix
Localité:
china
Prix de commande minimale:
8.5 per Kilogram
Commande minimale:
1 Kilogram
Packaging Detail:
1kg/5kgs/10kgs/20kgs/25kgs/200kgs
Heure de livraison:
3-5days after get payment
Capacité de Fournir:
8 Ton per Day
Payment Type:
T/T, L/C, Western Union, PayPal
Groupe de produits :
Personne àcontacter Mr. john
3/F,No.16,Tongqing Road,Tongle Community,Baolong Street,Longgang District, Shenzhen, Guangdong
Warm Tips
:
As addition cure silicone is a kind of
platinum cure system, which will be easy to cause uncured problem
,so pls kindly follow the tips as below
:
Â
Do not
mix
with liquid
condensation
silicone rubber or
even the tool which used for condensation silicone
rubber.
Do not mix with
organic matter
which contains N,
S, P organics and ionic compound like Sn, As,Hg,
Ph. (Do not
smoke when you use this
addition silicone rubber)
Do not add any pigment or powder into the
addition cure silicone
rubber without any testing
to prevent uncured
problem.
Description
Â
DC-A15 is a
kind of two part silicone rubber in addition cure or platinum
cure type with mixing ratio of 1:1 or *0:1.It can cure at room
temperature as well as under heat.
Its a kind
of food grade silicone which has got the United States FDA
certification. And mainly used for mold
making.
Application
DC-A15
silicone Rubber is mainly
used for making
molds of concrete stone,GRC,polyurethane products ; wax, candle
decoration; rapid prototyping and tire molds; chocolate, candy
and similar products molding.
Characteristics
An exceptional
fluidity and good operability, easy to
demold
Aging
resistance, high
temperature resistance
(**0℃***0℃)
Environmentally,
food-grade, FDA
Certification.
Good tensile and tear
strength
Outstanding bubble
releasing
Very Low
shrinkage
Non-deformation
Operation
Instructions
Step 1: prepare
the original moldsÂ
Prepare an perfect original mold and clean
it totally before operation.
Notes:
Make sure your original
molds and
operation tool were cleaned up totally to avoid uncured problem
.
Â
Step 2: Take
**0 G part A
and **0
G part B
(Or **0 G part A and *0 G part
B) and mix
them evenly.
Notes:Â Addition
cure mold making
silicon rubber
is two
parts flowing
liquid, Pls
follow the step strictly:
1.Weigh
the two part exactly by electronic weight. If any part not in
exactly weight, it may cause changing of hardness, or even cause
uncured problem.
2.Mix
part A and part B evenly. Otherwise
the silicon rubber will be partly solidified and this will give
birth to difficulties in your final operation. Whats more, the
finished molds will meet a short life. All of these will cause a
waste of silicone
rubber.
Â
Step 3: Vacuum
pumping
Without
exception, this step takes less than *0 minutes. Otherwise, it
will cause cross linking
reaction, and no more further steps will be
available.
Â
Step 4:
Pouring
casting or Brush
operation
Notes:1. For
simple pattern products we suggest use pouring operation way,
which will be very easy to operate and demould. Pourable silicone
require low viscosity which will be easy to flow smoothly and
easy to de-air .
        2.For
delicate pattern products we suggest use brushing operation way,
which can copy the pattern exactly. Brushable silicone require
high viscosity which wont be easy
to flow away and easy to brush .
Â
        3.
We suggest to set the silicone mold for
another *2 hours after demould before you put it into a large
production .
Â
Technical
Parameters Â
Â
| Model | Color | Mixing ratio (%) |
Pot
life (mins, under *5℃) |
Curing
time  |
Hardness  ( Shore A ) |
Tensile- strength  (MPa) |
Tear- strength (kN/m) |
Viscosity （After A/B mixed ,mPa.s） |
Shrinkage rate (%) |
Elongation （%） |
| DC-A15 | Translucent |
1:1 or *0:1 |
****0 |
(**5hrs under *5℃); (****0 mins under *0℃) |
*5±2 |
 >6.5  |
 >*2  |
 ***0±***0  |
<0.1% | Â >Â 6*0% |
| Pays: | China |
| N ° de modèle: | DC-A15 |
| Prix FOB: | 8.5 ~ 11.5 / Kilogram ( Negotiable ) Obtenir le dernier prix |
| Localité: | china |
| Prix de commande minimale: | 8.5 per Kilogram |
| Commande minimale: | 1 Kilogram |
| Packaging Detail: | 1kg/5kgs/10kgs/20kgs/25kgs/200kgs |
| Heure de livraison: | 3-5days after get payment |
| Capacité de Fournir: | 8 Ton per Day |
| Payment Type: | T/T, L/C, Western Union, PayPal |
| Groupe de produits : | addition cure silicone rubber |
