Prix FOB
Obtenir le dernier prix7 ~ 10.8 USD / Kilogram ( Negotiable )
|1 Kilogram Minimum Order
Pays:
China
N ° de modèle:
DC-A20
Prix FOB:
7 ~ 10.8 USD / Kilogram ( Negotiable ) Obtenir le dernier prix
Localité:
china
Prix de commande minimale:
7 per Kilogram
Commande minimale:
1 Kilogram
Packaging Detail:
1KG/3KG/5KG/10KG/20KG/25KG/200KG/drum vacuum packing for part A + Tin Catalyst (part B)
Heure de livraison:
3-5days after get payment
Capacité de Fournir:
8 Ton per Day
Payment Type:
-
Groupe de produits :
-
Personne àcontacter Mr. john
3/F,No.16,Tongqing Road,Tongle Community,Baolong Street,Longgang District, Shenzhen, Guangdong
Application
It
is mainly
used for making
molds of concrete stone,GRC,polyurethane products ; wax, candle
decoration; rapid prototyping and tire molds; chocolate, candy and
similar products molding.
Description
it is a
kind of two part silicone rubber in addition cure or platinum cure
type with mixing ratio of 1:1 or *0:1.It can cure at room
temperature as well as under heat. Its a kind of food grade
silicone which has got the United States FDA
certification.Â
 Characteristics
An exceptional
fluidity and good operability, easy
todemold
Aging
resistance, high
temperature resistanceÂ
Environmentally, food-grade, FDA
Certification.
Good tensile and tear
strength
Outstanding bubble
releasing
Very Low
shrinkage
Non-deformation
Operation
Instructions
Step 1: prepare
the original moldsÂ
Prepare an perfect original mold and clean it
totally before operation.
Notes:Make
sure your original molds and
operation tool were cleaned up totally to avoid uncured problem
.
STEP2Â 1.Weigh
the two part exactly by electronic weight. If any part not in
exactly weight, it may cause changing of hardness, or even cause
uncured problem.
 2.Mix
part A and part B evenly. Otherwise
the silicon rubber will be partly solidified and this will give
birth to difficulties in your final operation. Whats more, the
finished molds will meet a short life. All of these will cause a
waste of silicone
rubber.
Â
Step 3: Vacuum
pumping
Without
exception, this step takes less than *0 minutes. Otherwise, it will
causecross linking
reaction, and no more further steps will be
available.
Â
Step 4:
Pouring casting
or Brush operation
Notes:1. For
simple pattern products we suggest use pouring operation way, which
will be very easy to operate and demould. Pourable silicone require
low viscosity which will be easy to flow smoothly and easy to
de-air .
        2.For
delicate pattern products we suggest use brushing operation way,
which can copy the pattern exactly. Brushable silicone require high
viscosity which wont be easy to
flow away and easy to brush .
Â
        3.We
suggest to set the silicone mold for another *2 hours after demould
before you put it into a large production
.
Â
| Pays: | China |
| N ° de modèle: | DC-A20 |
| Prix FOB: | 7 ~ 10.8 / Kilogram ( Negotiable ) Obtenir le dernier prix |
| Localité: | china |
| Prix de commande minimale: | 7 per Kilogram |
| Commande minimale: | 1 Kilogram |
| Packaging Detail: | 1KG/3KG/5KG/10KG/20KG/25KG/200KG/drum vacuum packing for part A + Tin Catalyst (part B) |
| Heure de livraison: | 3-5days after get payment |
| Capacité de Fournir: | 8 Ton per Day |
| Payment Type: | - |
| Groupe de produits : | - |
