Re-therm

La description

Extra-fine liquid thermal insulation is thermal insulation of the latest generation. An operating principle of liquid ceramic thermal insulators differs fundamentally from an operating principle of "classic" insulators. Thanks to their unique properties, RE-THERM materials have perceptible effect of energy saving applying a layer as thick as 1mm!

RE-THERM is thermal insulation resembling a paint in appearance. Thanks to the fact that the materials have thin consistency, they can be applied on surfaces of any forms and structures. RE-THERM is applied by painting materials a brush, a roller, a spraying gun of high pressure (read more about the techniques of applying in the instructions on modifications of coatings). RE-THERM coatings, including acryl and silicone, possess waterproof properties apart from heat-insulating ones.

All RE-THERM coatings mainly consist of ceramic (a content of ceramic micro-spheres is 75%...85%) and silicone micro-spheres being in a suspension state in a liquid phase of water, an acrylic cohesive and special additives. Such a mixture makes RE-THERM coatings waterproof, flexible and at the same time resistant to external effects (ultraviolet, drops of temperature and humidity).

Heat conductivity of liquid thermal insulators RE-THERM is tens of times lower than that of "classic" insulators. A coating layer of RE-THERM, 1mm thick, applied on the surface, substitutes a layer of mineral wool thermal insulator 5cm thick according to its heat-saving efficiency. Moreover, a tremendous advantage of RE-THERM is an absence of necessity to protect from weather impact (drops of temperature and humidity, exposure to ultraviolet). An operating-temperature range of RE-THERM coatings is -40С… +250С.
 

It is reliably known that durability of "classic" insulators in the majority of cases does not exceed 2 years. Disclosure of facades shows that because of moisture and frosts classic insulator has fiber breaking and loses integrity of chambers-blisters, as a result, after as little as 1-2 seasons there is no question of its efficiency.

Besides, getting wet, "classic" heat-insulation becomes a habitat of weeds, fungi, pathogenic germs and other parasites being dangerous to human health.

A composition of extra-fine RE-THERM heat-insulators speaks for itself. Such properties as resistance to ultraviolet, flexibility at heat expansion of the base, waterproof ability, as well as ultra-low heat conductivity already speak about high coating life in entirely different environments of application. Facades and pipes being provided with RE-THERM heat-insulation will stand for at least 15 years (what far exceeds "classic heat-insulation").

The main fields of application of extra-fine liquid RE-THERM heat-insulation are:

• Heat power engineering and industry (cauldrons, pipe-lines, reservoirs for oil products storing, boilers, refrigeration equipment, compressor equipment and so on)
• Construction and Housing and Community Amenities (wall constructions, roofs, recessed balconies, butt ends of monolithic slabs, camp ceilings, foundations and so on)
• Transport (refrigerators, passenger transport, railway carriages, sea and river crafts, air transport and so on)

So, being developed in the airspace industry (see the history of appearance of RE-THERM coatings in section "History") RE-THERM coatings are able to solve most of the tasks in the field of heat-insulation and waterproofing on the whole Earth.

In summary, there is a further point to be made here:

• RE-THERM represents thermal coatings, completely substituted for the insulators being applied at the present time.
• RE-THERM represents a liquid suspension, being ready for application, which after application forms a polymer coating with unique heat-insulating и waterproof properties on the surface.
• RE-THERM can be applied on the surfaces of any forms and structures (bonding plaster, metal, concrete, brick, plastics and even glass).
• RE-THERM works within a range of temperatures from -60С to +250С. Special modifications of RE-THERM coatings can work within a range of temperatures from +350С without any change of its physical-and-technical properties.
• RE-THERM is ecologically harmless and fireproof products. Thanks to these properties it is possible to work with them even inside any room without additional ventilation.
• RE-THERM is applied on a clean surface, forming a flexible coating in 3 - 24 hours after applying.
• RE-THERM possesses excellent aesthetic properties and does not require establishment of a coating layer out of glass-fiber cloth or galvanized iron (in case of pipe covering) or protective plastering (in case of heat-insulation of building constructions).
• RE-THERM is impossible to use the second time, and this is why it is of no interest to vandals.
• RE-THERM possesses high resistance to mechanical effects, as well as firmness to ultra-violet emission and drops of temperature-and-humidity modes.
• RE-THERM can be applied both outside and inside (including food industry enterprises and children's institutions) thanks to its composition consisted of environmentally-friendly materials.