Prix FOB
Obtenir le dernier prix35 ~ 45 USD / Unit ( Negotiable )
|100 Unit Minimum Order
Pays:
Turkey
N ° de modèle:
A01
Prix FOB:
35 ~ 45 USD / Unit ( Negotiable ) Obtenir le dernier prix
Localité:
Turkey
Prix de commande minimale:
35 per Unit
Commande minimale:
100 Unit
Packaging Detail:
15L plastic drums, different sizes of crate is available for safe transportation
Heure de livraison:
1-2 weeks depending on season condition
Capacité de Fournir:
1000 Unit per Week
Payment Type:
Western Union, L/C, T/T
Groupe de produits :
Turkey
Personne àcontacter Mr. MAHMUD
75.Yil Mah., Oto Esnaflar San.Sit., 221.Cad., A Blok, No: 5,, Eskisehir, Odunpazari
PLUSTONE
A*1
PREMIUM QUALITY INTERIOR MATT PAINT
PLUSTONE A*1 is a premium quality, wet scrub resistant,
waterproofing, interior use, matt emulsion paint. It can be applied
on concrete, plaster, brick, masonry surfaces, plywood, anti-rust
primed steel, etc. It has anti-bacterial properties, which
give to material a mould resistance. PLUSTONE A*1 is available in
an attractive range of colours and offers the advantages of low
material consumption and a high quality professional finish.
PROPERTIES: PLUSTONE A*1 provide excellent hiding
power, perfect water vapour permeability and low consumption, which
makes material highly economical in long term of exploitation.
PLUSTONE A*1 contains high quality polymer resins to ensure
excellent resistance. Formulate without using of solvent and any
other hazardous additives, which makes material environmentally
friendly.
AREA OF USE: PLUSTONE A*1 suitable for high
quality interior painting works of plaster, concrete, filler
treated brick, cardboard, wooden surfaces, also for gypsum board,
chipboard and wooden fibre board surfaces. Suitable for new and
previously painted surfaces. Interior walls and ceilings in
premises in which high wear resistance is required such as lobbies,
staircases, corridors, patient rooms and other surfaces which are
subject to higher than normal stress. Â
PREPARATION OF SURFACE: All dust, dirt and foreign
matter should be scraped and brushed away. Also the surfaces
should be free from salts, oil, grease and ridges. Before applying
to old surfaces, ensure the substrate is firm. First wash
down the old surface with a sugar-soap solution, rinse and allow
drying before repairing or applying the primer. Protect all
adjacent surfaces not to be covered. All cracks, chips, voids
and damages should be repaired using PLUSPLAS repair mortars or
PLUSSPAC plasters. Prime all untreated surfaces with a PLUSPRIME or
PLUSBOND primer.
APPLICATION: Stir well before use. The application
surfaces and area should be over *5°C. PLUSTONE A*1, diluted
with clean water in ****0%, applying in 2 coats by the roller,
brush or spray. Leave 2 to 4 hours between coats. Reserve
enough material for one uniform surface and mix into one can to
avoid possible colour differences. Clean tools and equipment with
water after use.
CONSUMPTION: 0.****0.**0 L/m2 in 2 coats of
application.
HEALTH & SAFETY: Keep out of reach of
children. Avoid contact with skin and eyes. In case of
contact with skin, wash down with clean water. In case of
contact with eyes, rinse immediately with plenty of clean water and
seek medical advice. Use in a well ventilated area.Â
PACKAGING & STORAGE: PLUSTONE A*1 is supplied
in *5 and 4 L plastic pails. Store material in a clean dry area,
protected from direct sunlight and extreme heat and cold. Unopened
containers can be stored for *2 months. Use the oldest
material first.
RECYCLING: Empty cans should be recycled or
disposed of in accordance with local regulations. Liquid waste
should be destroyed according to the local regulations. For
packaging recycle type look on a bottom of pails.
TECHNICAL DATA
Product
           Â
Premium quality interior matt emulsion paint
BinderÂ
           Â
Acrylic polymers
Colour
             Â
Colour chart of PLUSCOAT
Diluting
           Â
****0% with water
Specific gravity 1.5
Consumption   0.****0.**0 L/m2 in 2 coats
Application       Roller,
brush, airless spray
Drying time      **4 hours between
coats, deep drying in *4 hours.
Packaging         Â
*5 and 4 L plastic pails
Storage
            Â
*2 months in the original unopened tare
| Pays: | Turkey |
| N ° de modèle: | A01 |
| Prix FOB: | 35 ~ 45 / Unit ( Negotiable ) Obtenir le dernier prix |
| Localité: | Turkey |
| Prix de commande minimale: | 35 per Unit |
| Commande minimale: | 100 Unit |
| Packaging Detail: | 15L plastic drums, different sizes of crate is available for safe transportation |
| Heure de livraison: | 1-2 weeks depending on season condition |
| Capacité de Fournir: | 1000 Unit per Week |
| Payment Type: | Western Union, L/C, T/T |
| Groupe de produits : | Exterior coatings |
