Prix FOB
Obtenir le dernier prix75 ~ 90 USD / Unit ( Negotiable )
|100 Unit Minimum Order
Pays:
Turkey
N ° de modèle:
-
Prix FOB:
75 ~ 90 USD / Unit ( Negotiable ) Obtenir le dernier prix
Localité:
Turkey
Prix de commande minimale:
75 per Unit
Commande minimale:
100 Unit
Packaging Detail:
15L plastic drums, different sizes of crate is available for safe transportation
Heure de livraison:
2-3 weeks depending on season condition
Capacité de Fournir:
1000 Unit per Week
Payment Type:
Western Union, L/C, T/T
Groupe de produits :
Turkey
Personne àcontacter Mr. MAHMUD
75.Yil Mah., Oto Esnaflar San.Sit., 221.Cad., A Blok, No: 5,, Eskisehir, Odunpazari
PLUSGUARD
A*0
EXTERIOR ELASTOMERIC PAINT
PLUSGUARD A*0 is a high quality, resistant to extreme climate
condition, waterproofing, exterior and interior use, pure acrylic
mid-shine elastomeric paint. It can be applied on concrete,
plaster, brick, masonry surfaces, plywood, anti-rust primed steel,
etc. It has anti-bacterial properties, which give to material
a mould resistance. PLUSGUARD A*0 gives outstanding economy with
the advantage of a low material consumption rate, high hiding power
and excellent adhesion.
PROPERTIES: PLUSGUARD A*0 provide excellent
weather and pollution-resistant properties, with good hiding power,
perfect water vapour permeability and low consumption, which makes
material highly economical in long term of exploitation. PLUSGUARD
A*0 based on crosslinking pure acrylic polymers, provides excellent
dirt pick-up, with ability to bridge cracks and its CO2 barrier
properties helps to preserve concrete from corrosion. Formulate
without using of solvent and any other hazardous additives, which
makes material environmentally friendly.
AREA OF USE: PLUSGUARD A*0 can be applied on most
interior and exterior finishes such a cement base renders, dry wall
panels, timber, plywood, galvanised and anti-rust applied steel
etc. It is creating perfect finish for all functional and design
requirements, makes luxury walls for commercial and residential
use, particularly in high traffic areas. Especially developed for
protecting of concrete bridges from carbonation.
PREPARATION OF SURFACE: All dust, dirt and foreign
matter should be scraped and brushed away. Also the surfaces
should be free from salts, oil, grease and ridges. Before applying
to old surfaces, ensure the substrate is firm. First wash
down the old surface with a sugar-soap solution, rinse and allow
drying before repairing or applying the primer. Protect all
adjacent surfaces not to be covered. All cracks, chips, voids
and damages should be repaired with repair mortars or plasters of
PLUSCOAT. Prime all untreated surfaces with a suitable primer.
APPLICATION: Stir well before use. The application
surfaces and area should be over *5°C. PLUSGUARD A*0, diluted
with clean water in ****0%, applying in 2 coats by the roller,
brush or spray. Leave 2 to 4 hours between coats. Reserve
enough material for one uniform surface and mix into one can to
avoid possible colour differences. Clean tools and equipment with
water after use.
CONSUMPTION: 0.***0.*5 L/m2 in 2 coats of
application.
HEALTH & SAFETY: Keep out of reach of
children. Avoid contact with skin and eyes. In case of
contact with skin, wash down with clean water. In case of
contact with eyes, rinse immediately with plenty of clean water and
seek medical advice. Use in a well ventilated area.Â
PACKAGING & STORAGE: PLUSGUARD A*0 is supplied
in *5 and 4 L plastic pails. Store material in a clean dry area,
protected from direct sunlight and extreme heat and cold. Unopened
containers can be stored for *2 months. Use the oldest
material first.
RECYCLING: Empty cans should be recycled or
disposed of in accordance with local regulations. Liquid waste
should be destroyed according to the local regulations. For
packaging recycle type look on a bottom of pails.
TECHNICAL DATA
Product
           Â
Exterior elastomeric paint
BinderÂ
           Â
Pure acrylic polymers
Colour
             Â
Colour chart of PLUSCOAT
Diluting
           Â
****0% with water
Specific gravity 1.3
Consumption   0.***0.*5 L/m2 in 2 coats
Application       Roller,
brush, airless spray
Drying time      **4 hours
Packaging         Â
*5 and 4 L plastic pails
Storage
            Â
*2 months in the original unopened tare
| Pays: | Turkey |
| N ° de modèle: | - |
| Prix FOB: | 75 ~ 90 / Unit ( Negotiable ) Obtenir le dernier prix |
| Localité: | Turkey |
| Prix de commande minimale: | 75 per Unit |
| Commande minimale: | 100 Unit |
| Packaging Detail: | 15L plastic drums, different sizes of crate is available for safe transportation |
| Heure de livraison: | 2-3 weeks depending on season condition |
| Capacité de Fournir: | 1000 Unit per Week |
| Payment Type: | Western Union, L/C, T/T |
| Groupe de produits : | Exterior coatings |
