Prix FOB
Obtenir le dernier prix|
1 Pallet Minimum Order
Pays:
USA
N ° de modèle:
1037
Prix FOB:
Localité:
Pennsylvania, USA
Prix de commande minimale:
-
Commande minimale:
1 Pallet
Packaging Detail:
Shipped dry in 50 lb. bags and up to 3000 lb. super sacks.
Heure de livraison:
2 to 4 weeks depending on delivery location
Capacité de Fournir:
264 Ton per Month
Payment Type:
Other, PayPal, Money Gram, Western Union, D/P, L/C, T/T
Groupe de produits :
Personne àcontacter Mr. Brandon
503 Hegner Way, Sewickley, Pennsylvania
Macor Binder ***7 General Characteristics Macor Binder ***7 is a
Black Iron Oxide based foundry sand additive designed to reduce
casting defects.Â
Suggested Applications Foundry: Used in Gray Iron
and Ductile Iron, Steel and Non-ferrous foundries.
Sand System: For dry or green molding sand as well
as cold box, hot box, and catalyzed resin cores. Advantages -
Improves dry strength and surface strength
- Reduces scabs, cuts and penetration of the sand metal
interface.
- Eliminates veins and pinholes Mixing Guide In Molding
Sand: In molding sand use at ½% to 2% with 1% being most
common use rate based on the weight of the sand. ***7 can be added
with the dry ingredients of the molding sand and blended thoroughly
before water is added or it can be mixed with the slurry and then
added to the dry sand. ***7 burns out of the molding sand at
approximately the same rate as sea coal. This means that once it is
established in the molding sand, the rate of addition can be
reduced usually to between 1/*0% to ¼%.
In Cold Box, Hot Box, and Catalyzed Resin Cores:
***7 is added at a rate of ½% to 2% with ¾% being the most common
to reduce penetration and prevent veining. ***7 should be added to
the dry ingredients and milled or mixed long enough to insure
uniform dispersion. This can be from *0 seconds to 2 minutes
dependent on the efficiency of mixing. This addition sequence will
result in maximum tensile PSI in most resin cores. Standard
Packaging Shipped dry in *0 lb. bags and up to ***0 lb. super
sacks.
| Pays: | USA |
| N ° de modèle: | 1037 |
| Prix FOB: | Obtenir le dernier prix |
| Localité: | Pennsylvania, USA |
| Prix de commande minimale: | - |
| Commande minimale: | 1 Pallet |
| Packaging Detail: | Shipped dry in 50 lb. bags and up to 3000 lb. super sacks. |
| Heure de livraison: | 2 to 4 weeks depending on delivery location |
| Capacité de Fournir: | 264 Ton per Month |
| Payment Type: | Other, PayPal, Money Gram, Western Union, D/P, L/C, T/T |
| Groupe de produits : | Foundry Sand Additives |
