La description
KP7
- Concrete Repair Waterproofing ( polyurethane
foam)
Urethane foaming agent is a product that will be scientific
semi-permanently in a format that completely block
the of the shortcomings of the existing product and the
reaction force at the time of foaming to enhance tissue
to water is quickly, injection will be reached to
crack inside in a short time
â— The low pressure, and to smoothly injection, Packer
breakage rate is less
â— Cracks reaction rate is excellent, perfectly performed at
the joints
â— Structure of the form is excellent durability, water
resistance, underground structures
â— Leaking cracks in the structure of the vibration
area
â— Leading to concrete joint leak site
â— Leakage area of the wet concrete structures
â— Parking lamps and a rear section grouting area for
leaks
Construction Method
Perforations and packer installation
â‘ To secure the packer with a perforation to crack leak
site to high-pressure injection.
â‘¡ Drill a hole of constant diameter with hammer drill at the
time of perforation
â‘¢ Angle of drilling, work in or below *5 degrees toward the
crack from the concrete surface
â‘£ The depth of the perforation hole to meet with crack,
should be 1/2 to 2/3 of the thickness of the concrete
⑤ In the case of less than *0cm, thickness of concrete is
drilled directly into the cracked
portion
â‘¥ If the thickness of the concrete is *0cm ~ *0cm, drilling
from a distance of around 1/5 of the thickness of the concrete
from
cracking and *0cm intervals centered on the crack parts
perforates with zigzag manner
⑦ Select the correct packer for the field and Using the
T-scroll and tighten packer in a hole tightly to prevent
backpressure stop for several minutes, Meanwhile, the
injected foam blowing agent is enough to fill cracks and role as
the seal
â‘£ After about 5 minutes, the re-injection
⑤ If the crack is very large, so that the injection before
sealing
Notes
â— Use only as much use
â— After use, wipe it with a dry towel
â— After the work, clean the machine (injection) with oil and
thinner
â— Must wear protective equipment for the work (Safety
helmet, safety glasses etc)
â— Please keep sealed for the rest of the forming agent
â— If attached to your skin, wash immediately with running
water
â— Please keep out of reach of children
| Pays: |
South Korea |
| N ° de modèle: |
-
|
| Prix FOB: |
( Negotiable ) (Negotiable)
Obtenir le dernier prix
|
| Localité: |
- |
| Prix de commande minimale: |
- |
| Commande minimale: |
1000 Kilogram |
| Packaging Detail: |
standard export packing |
| Heure de livraison: |
20days with contract |
| Capacité de Fournir: |
100 Ton per Month |
| Payment Type: |
T/T, L/C |
| Groupe de produits : |
- |
