Prix FOB
Obtenir le dernier prix3000 ~ 4000 USD / Set ( Negotiable )
|1 Set Minimum Order
Pays:
China
N ° de modèle:
HLPMH
Prix FOB:
3000 ~ 4000 USD / Set ( Negotiable ) Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
3000 per Set
Commande minimale:
1 Set
Packaging Detail:
Standard Packing.
Heure de livraison:
20-25 Days after receiving Deposit
Capacité de Fournir:
22 Set per Month
Payment Type:
Western Union, L/C, T/T
Groupe de produits :
-
Personne àcontacter Elvis
Chengdu, Sichuan
Product Introduction
ÂHLPMH series crusher is a kind of new fine crusher invented by your company with advantages of high efficiency, energy saving, environmental protection and intelligent, etc.
ÂÂ
ÂOperating Principle
ÂTwo motors drive rollers of the first and second level in the opposite direction. When materials comes into the first crushing level by the distributor. interlaced teeth crush the materials from **0mm to *0mm and below. Then, materials come into the second crushing level for further crushing from *0mm to 8mm and below. Compared with traditional 4PG crushers, this crusher have the process of impact crushing for times, thus the materials are already smaller after pass the first crushing level. This can lighten the working load of the second crushing level and pro-long usage life of the second tooth plates.
ÂÂ
ÂMain Features
Â
    Â
1. Single crusher still has high output and the size is even. The
size can be arbitrary adjustable in the range of 8 to
*5mm.
     2. Air eddy offsets each other,
meanwhile, the leeway of the feeding and discharging hoppers is
approximately equal, which leads to no dust rising. Theres no
need for installing special dust removal equipment.
     3. The adopting of a special
kinematic principle makes the crusher no sticks and stop-up and
no particular moisture requirement of the materials.
     4. The toothed plate is forked
tail type which adopts sliding lockers to fasten the plate and
achieves easy removal of it.
     5. The design takes fully
advantages of pull crushing theory and kinetic energy principle
to reduce idle work. Thus, its energy assumption is *0%**0% of
same types ring hammer crusher.
     6. Change lubricating oil
automatically to protect the bearing and prolong its usage
life.Â
     7. New escaping structure of the
pull crusher makes use of lever principle to increase range
springs stiffness and extend range spring group so that escaping
distance of single side reaches ****5mm, ability of passing
through hard things for the crusher has improved and displacement
adjusting becomes convenient.
      8.
No need of vibrating screen, can replace traditional production
lines, large crushing rio (*0:1).
     9. Each toothed roller's vibration
frequency is different, but they cancel each other. Vibration and
noise greatly reduce (without damping platform), and live load is
1.3 times of dead load with small impact on the building.
     *0. Equipped with special
open device, the first and second door can be opened
convenient. It is easy to remove quick-wear parts.
hlcrusher(at)**3(dot)com
| Pays: | China |
| N ° de modèle: | HLPMH |
| Prix FOB: | 3000 ~ 4000 / Set ( Negotiable ) Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | 3000 per Set |
| Commande minimale: | 1 Set |
| Packaging Detail: | Standard Packing. |
| Heure de livraison: | 20-25 Days after receiving Deposit |
| Capacité de Fournir: | 22 Set per Month |
| Payment Type: | Western Union, L/C, T/T |
| Groupe de produits : | - |
