Prix FOB
Obtenir le dernier prix3500 ~ 5600 USD / Set ( Negotiable )
|1 Set Minimum Order
Pays:
China
N ° de modèle:
HLPMG
Prix FOB:
3500 ~ 5600 USD / Set ( Negotiable )Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
3500 per Set
Commande minimale:
1 Set
Packaging Detail:
Standard Packing.
Heure de livraison:
20-25 Days after receiving Deposit.
Capacité de Fournir:
18 Set per Month
Payment Type:
Western Union, L/C, T/T
Groupe de produits :
-
Personne àcontacter Elvis
Chengdu, Sichuan
Product
Introduction
   HLPMG series roller
crusher is a type crusher for medium fine crushing, which is
invented by our company with advantages of high efficiency,
energy saving, environmental and intelligent, etc. Its
suitable for materials of the compressive strength value≤*0Mpa,
particle size ≤**0mm, such as coal, coal gangue, slag, carbon, etc.
It can directly break materials to be less than *0mm.
Mainly used in electricity, mining, chemical industry and other
industry. It is one of the best choices for crushing coal
for circulating fluidized bed boiler in power plant,
pulverized coal furnace, coking plant, iron-works,
etc.
Â
Operating
Principle
      Two motors
drive rollers of the first and second level in the opposite
direction. When materials comes into the first crushing level by
the distributor. interlaced teeth crush the materials from **0mm to
*0mm and below. Then, materials come into the second crushing level
for further crushing from *0mm to *0mm and below. Rollers teeth are
crossed with each other which can crush materials with effects such
as cutting, splitting, breaking, pulling, etc. Meanwhile, materials
rolled over and over during crushing so that the crusher can find
the most fragile position for crushing. Toothed rolls only crush
materials of bigger size, small size materials that meet the
requirement can discharge direct to avoid
over-crushing.
Â
Main
Features
      1. Single
crusher still has high output and the size is even. The size can be
arbitrary adjustable in the range of 8 to *5mm.
      2. Air eddy offsets each
other, meanwhile, the leeway of the feeding and discharging hoppers
is approximately equal, which leads to no dust rising. Theres no
need for installing special dust removal equipment.
      3. The adopting of a special
kinematic principle makes the crusher no sticks and stop-up and no
particular moisture requirement of the materials.
      4. The toothed plate is forked
tail type which adopts sliding lockers to fasten the plate and
achieves easy removal of it.
      5. The design takes fully
advantages of pull crushing theory and kinetic energy principle to
reduce idle work. Thus, its energy assumption is *0%**0% of same
types ring hammer crusher.
      6. Change lubricating oil
automatically to protect the bearing and prolong its usage
life.Â
      7. New escaping structure of
the pull crusher makes use of lever principle to increase range
springs stiffness and extend range spring group so that escaping
distance of single side reaches ****5mm, ability of passing through
hard things for the crusher has improved and displacement adjusting
becomes convenient.
      8. No need for vibrating
screen. One crusher can replace several traditional crushing
production lines with the broken ratio *0:1.
      9. Each toothed roller's
vibration frequency is different, but they cancel each other.
Vibration and noise greatly reduce (without damping platform), and
live load is 1.3 times of dead load with small impact on the
building.
     *0. Equipped with special open
device, the first and second door can be opened convenient.
It is easy to remove quick-wear parts.
Â
Patent
Technology
     There has patent
bearing block escape switch installed on HL series roller crusher,
when small materials that cannot be broken like wood or steel enter
into the crusher, the breaking force increases which makes the
escape switch move backwards, this moves related roller so that the
gap between 2 rollers become larger, so that the wood or steel can
fall down. After that, the switch resets quickly which wont
influence the normal operation. When big materials cannot be broken
enter into the crusher, escape switch can reduce the impact force,
damage the safety pin under the worst circumstances to protect the
crusher from damage. Also we can use adjusting screw on the escape
switch of HL series roller crusher(fine crushing) or special
product size adjusting device on HL series roller crusher (primary
crushing and secondary crushing), thus can compensate tooth plate
wearing, extend the usage time of tooth plate and guarantee the
product size all the time.
hlcrusher(at)**3(dot)com
Pays: | China |
N ° de modèle: | HLPMG |
Prix FOB: | 3500 ~ 5600 / Set ( Negotiable ) Obtenir le dernier prix |
Localité: | - |
Prix de commande minimale: | 3500 per Set |
Commande minimale: | 1 Set |
Packaging Detail: | Standard Packing. |
Heure de livraison: | 20-25 Days after receiving Deposit. |
Capacité de Fournir: | 18 Set per Month |
Payment Type: | Western Union, L/C, T/T |
Groupe de produits : | - |