Prix FOB
Obtenir le dernier prix6.5 ~ 7 USD / Liter ( Negotiable )
|10000 Liter Minimum Order
Pays:
UAE
N ° de modèle:
3405
Prix FOB:
6.5 ~ 7 USD / Liter ( Negotiable ) Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
6.5 per Liter
Commande minimale:
10000 Liter
Packaging Detail:
plastic buket 10, 20, 200 L, euro palet
Heure de livraison:
according destination (15 - 30 days)
Capacité de Fournir:
100000 Liter per Month
Payment Type:
T/T, L/C, Other
Groupe de produits :
-
Personne àcontacter nick
APPLICATION PROCEDURE HYPERFINE
INSULATION
AKTERM FACADE.Â
 AKTERM FACADE has good
adhesion to almost all known materials. It has low Newtonian flow,
so when applied to vertical surfaces almost no effect of "sliding",
even when applied in a layer thickness of 1 mm or
more. Insulation work can be done on
surfaces with temperatures ranging from *5 ° C to ***0 °
C.
 1. Prepare the
surface.
1)To prepare the surface for application: remove loose
sections, broaden crack, remove oily inclusion of cement concrete
clean "milk", repair the surface (including the joints between the
bricks to reduce material consumption and deeper grooves **7 mm) of
cement- plastering compositions. Sweep surface is made by
sandblasting, wire brush or abrasive wheels. Surface with any
quality acrylic primer deep impregnation for concrete surfaces **2
times. Wait until dry.Â
2). Preparation of insulating coating.
 AKTERM FACADE ready to
use. Must be mixed, if necessary, add a little water before
applying a pre-prepared surface. The amount of water (5 to *0%)
depends on the temperature of the main application and the
subsequent operation. Consult your nearest Akterm manager. With a
large storage time allowed inside the package bundle
fraction. DO NOT
OVER-stirred
When using a drill - maximum mixing speed - ******0 r /
min. Using the vertical displacement vane so immersed in the liquid
portion of thickened, turn the drill and start slowly rotating
blades, mixing clumps with a liquid. Stir until the product becomes
like a cream. Approximate time of mixing - mixer for **5 minutes,
stirring **7 minutes manually. If it is about removing condensate,
"coat" of frost - the material is applied with a minimal addition
of water, with a maximum interlayer spacing.
Â
| Pays: | UAE |
| N ° de modèle: | 3405 |
| Prix FOB: | 6.5 ~ 7 / Liter ( Negotiable ) Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | 6.5 per Liter |
| Commande minimale: | 10000 Liter |
| Packaging Detail: | plastic buket 10, 20, 200 L, euro palet |
| Heure de livraison: | according destination (15 - 30 days) |
| Capacité de Fournir: | 100000 Liter per Month |
| Payment Type: | T/T, L/C, Other |
| Groupe de produits : | - |
