FOB Price
Obtenir le dernier prix1 ~ 2 / Metric Ton
|Minimum Order
Localité:
-
Prix de commande minimale:
Commande minimale:
1 Metric Ton
Packaging Detail:
contact us
Delivery Time:
depends on the quantity ordered
Supplying Ability:
500000 Metric Ton per Month
Payment Type:
T/T, L/C
Personne àcontacter Alexander
Standard diesel fuel (sometimes called diesel oil) comes in two
grades: Diesel*1 (D1) and Diesel*2 (D2). Diesel or Diesel fuel in
general is any fuel used in diesel engines. That\'s why its also
commonly called as AGO or Automotive Gas Oil. Diesel fuel is a type
of fuel derived from the distillation of oil that is heavier than
gasoline but lighter than engine oil and heavy oil.
D1 is similar to kerosene and is lighter than D2. While D2 is sold
most of the time, D1 is sold during winter in very cold climates
and not sold in hot weather countries. But D2 is easily available
in most countries around the world. Despite rising awareness of
environmental protection, D2 remains to be a key type of fuel for
use in vehicles in many countries.
WHAT IS DIESEL EN**0 ?
EN**0 describes the physical properties that all automotive diesel fuel must meet if it is to be sold in the European Union and Britain. Automotive diesel has national variants but the usual variants traded are EN**0 and EN**0 which are specified by ISO in Paris.
EN**0 for diesel (in Europe) has been around for almost *0 years. However fuel, like most products, is subject to a process of continuous development and that development includes responding to legislation. The EN**0 standard has been amended many times since ***3.
The EN **0 had been introduced along with the European emission standards. With each of its revisions the EN **0 had been adapted to lower the Sulphur content of diesel fuel. Since ***7 this is called ultra low Sulphur diesel as the former function of Sulphur as a lubricant is absent (and needs to be replaced by additives).
The quality of European diesel fuels is specified by the EN **0 standard. While these specifications not are mandatory, they are observed by all fuel suppliers in Europe. Automobile diesel EN **0 is intended for application in diesel engines. Diesel motor fuel quality meets the requirements of European Standard EN **0.
For operation in the conditions of a temperate climate following marks of fuel diesel automobile EN **0 are offered: Grade C limiting filterability temperature *5 ° C; Grade D limiting filterability temperature **0 ° C; Grade E limiting filterability temperature *5 ° C; Grade F limiting filterability temperature **0 ° C.
The entire volume of produced diesel fuel quality meets the requirements for fuels for vehicles of Euro 4 and Euro 5. Low sulfur content in diesel EN **0 reduces emissions of sulfur oxides into the atmosphere, which is especially important for for inhabitants of big cities.
Some of the important revisions of the EN **0 standard have been:
EN **0:***3 the first EU diesel fuel specification. It established a Sulphur limit of 0.2% in on-road and non-road diesel fuels.
EN **0:***9 this standard reflected the Sulphur (**0ppm) and cetane (*1) specifications by Directive *8/*0/EC.
EN **0:***4 Sulphur limits of *0ppm (Euro 4) and *0ppm (Euro 5) as regulated by Directive ***3/*7/EC. FAME (Fatty Acid Methyl Ester) content of 5% (B5)
EN **0:***9 FAME content of 7% (B7) as regulated by Directive ***9/*0/EC. This directive also adopts mandatory biofuel requirements for refiners and introduces a *0ppm Sulphur limit in non-road fuels effective ***1.
WHAT IS ULTRA LOW SULPHUR DIESEL (ULSD) ?
Ultra Low Sulfur Diesel (ULSD) is diesel fuel with substantially lowered sulfur content. As of ***6, almost all of the petroleum-based diesel fuel available in Europe and North America is of a ULSD type.
There is not a single standard set of specifications and as the government mandated standard becomes progressively more strict so does the definition. The move to lower sulfur content is expected to allow the application of newer emissions control technologies that should substantially lower emissions of particulate matter from diesel engines.
This change occurred first in the European Union and is now happening in North America. New emissions standards, dependent on the cleaner fuel, have been in effect for automobiles in the United States since model year ***7.
ULSD has a lower energy content due to the heavy processing required to remove large amounts of sulfur from oil, leading to lower fuel economy. Using it requires more costly oil.
