Description
High temperature and
moisture resistant adhesive（THO****-II）
Outline It is heterocyclic adhesive which cures fast when
heated. it is temperature resistant and easy to operate. No bubbles
appear after curing thus making the surface smooth and bright. Its
viscosity and heat resistant property is adjustable.
Applications It applies
to the coating, infiltrating and encapsulating of device surface,
electronic components and chips in electric engine, capacitor,
thermocouples, transformers, rectifiers, electronic modules LSI and
other products to protect them against moisture, chemicals,
excessive heat, vibration, mechanical impact and thermal shocks. It
also applies to the bonding of metals, alloy, ceramics, glass and
transparent compound which work under water or in some humid
environment.
Features It is one-component transparent thick liquid.
It cures within one minute when heated with the temperature **0°C
for one minute.
It is resistant to shock, ultraviolet light and extreme weather
once it cures because it is durable and with good ductility and low
contraction coefficient.
Being heat-resistant, it adapts to a wide range of temperature and
bonds well under high temperature.
Being moderate in viscosity, the surface appears smooth and bright
after curing.
Apply the adhesive to the surface of the substrates directly or
fill it into the gap, then heat it...
You.ll get long term durability and resistance to moisture,
chemicals, oils, and temperature extremes.
Being stable, its storage time is one year.
The main technical parameters are as follows:
Heat resistance scope：- *2 °C—+ **5 °C
volume resistance: 1.7×***5Ω.cm sheet
resistance 2.5×***5Ω
voltage withstand ****5.5kV/mm
hardness shore D*5
dielectric coefficient:4.4 Tensile strength≥*5MPa; bending
strength≥*5 Mpa compressive strength≥**5MPa
shearing strength≥*8.8Mpa shock strength≥*7KJ/m*m
Instruction 1.To get the best results, the two surfaces being
bonded should be free of oils, dirt, moisture and other
contaminants and should be slightly roughed or sanded to remove
gloss.
2. Spray the adhesive on the substrates, put them together and
apply some strength on them, heat it with **0°C, wait for one
minute and let it dry
Notes 1. Better to keep the working place well ventilated.
2 .If it has contact with skin, you should wash with soap.
3. It can be stored at well-ventilated places with low temperature,
and keep them away from fire. Cover the lip after using it.
