FOB Price
Obtenir le dernier prix|
Minimum Order
Localité:
-
Prix de commande minimale:
-
Commande minimale:
-
Packaging Detail:
-
Delivery Time:
-
Supplying Ability:
-
Payment Type:
-
Personne àcontacter Mr. Lewis
Huangshi, Hubei
DIN 1.***4 / X*0CrMoV**1 Steel is an air cooling type of hot work die steel. The Vanadium content of din 1.***4 is twice over 1.***3 steel,which improving hot hardness of X*0CrMoV**1.When the temperature of material is **0°C,the 1.***4 steel also has a wonderful strength and hardness,with high wear resistance and toughness.
Chemical Composition
C: 0.***0.*2; Si: 0.***1.*0; Mn: 0.***0.*0; P: max0.**0; S:
max0.**0;
Cr: 4.***5.*0; Mo: 1.***1.*0; V: 0.***1.*5;
Equivalent Grades
AISI/ASTM: H*3
JIS: SKD*1
Form of 1.***4 Steel
Round / Square / Flat Bars, Plates, Blocks.
Size of X*0CrMoV**1
Round bar
dia. ***6mm (Cold Drawn);
dia. ****0mm (Hot Rolled);
dia. *****0mm (Hot Forged);
dia. ******0mm (Free Forging);
Flat bar
Thickness: **2.5mm(Cold Rolled); 1.***0mm(Hot Rolled); *****0mm(Hot
Forged);
Width: Max**0mm;
Surface Condition
Black, Peeled, Rough Machined, Ground
Hardness of 1.***4 Steel
Annealed (+A):
max **5HB
Mechanical Properties of 1.***4 / X*0CrMoV**1
Tensile strength
Yield point
Percentage reduction of area after fracture
Elongation after fracture
Impact test
Quenched and Tempered (+QT) of 1.***4 Steel
1. Preheat din 1.***4 steel to the temperature of ******5°C
2. Transfer to salt bath standing at the hardening temperature of
***0°C.
3. Soak and quench into salt standing at **0°C.
4. Withdraw and cool in air.
5. Heat uniformly to the required temperature as per two hours /
*5mm of total thickness.
6. Withdraw from the furnace and cool in air.
7. The usual tempering temperature is **0°C which depending on
the hardness requirements.
Applications of X*0CrMoV**1 steel
X*0CrMoV**1 Steel is widely used in the manufacture of forging
hammer,die tools,hot extrusion mould and core rod. DIN 1.***4 steel
is also good for forging press molding,precision forging machine
with mould set piece,aluminum,copper and other alloy die-casting
mold.
Enquiry for DIN 1.***4 / X*0CrMoV**1 Tool Steel Round / Square / Flat Bars, Plates and Blocks.
