FKM raw gum 26120/26140 By ZHEJIANG FOTECH INTERNATIONAL CO., LTD, China
Pas encore membre de TradeKey.com? Inscrivez-vous pour vous connecter avec 9 millions d'importateurs et exportateurs.
Rejoignez-le maintenant c'est gratuit |
BOOK A CALL
Book Call On Your Favorite Time

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services

Contact Us
FKM raw gum 26120/26140

FKM raw gum 26120/26140

( Negotiable )

|

Minimum Order

Localit:

-

Prix de commande minimale:

-

Commande minimale:

100 Kilogram

Packaging Detail:

20kg/carton

Delivery Time:

within 20days

Supplying Ability:

30 Metric Ton per Month

Payment Type:

T/T, L/C, D/A, D/P

Contacter maintenant
Membre gratuit

Personne à contacter Mr. Lion

: Room 606, Weiling Mansion, 380 Jiangnan Avenue,, Binjiang District, Hangzhou,, Zhejiang,

Contacter maintenant

Description

Flurine ****0、****0 are high Mooney gum with excellent tensile strength, low compression set, improved mold release as well as good metal bonding, so they are suit able to be molded into O-rings, gaskets, as well as oil-seal.

 

Technical indexes

 Items

****0

****0

Appearance

White or light-yellow film

Density (g/cm3) *3 °C

1.*2+0.*2

1.*2+0.*2

Mooney viscosity (ML(1**0)**1°C)

**0+*0

**0+*0

Fluorine content (%)

*6

*6

Tensile strength after press cure(MPa)**70C,*0min

9.0

9.0

Tensile  strength after post  cure(Mpa)**00C,*4H

*3.0

*3.0

Elongation at break after press cure ( Mpa)**70C,*0min

**0

**0

Elongation at break after post cure ( Mpa)**00C,*4H

**0

**0

**0°C*0H Compressibility *0% Compression set (%)

*2

*2

**0℃,in No.3 jet fuel, weight increasel after *4H (%)

5

5

Water content (%)

0.1

0.1

Typical uses

Extrusion products,morld-pressing oil tight made by bisphenolAF/BPP              sulfuration

Mould-pressing products,    highstrength pressure          rubber,etc.

 

Package,storage and transportation

  1. Flurine fluoroelastomer is packed in PE bags in the form of flake, and then packed into carton with net weight *0kg per  carton.
  2. Flurine fluoroelastomer should be stored in clean, dry and cool warehouse. It can be transported as non-hazardous       chemicals and should be far away from pollution sources, sunshine as well as water during transportation
  3. It is suggested that Flurine fluoroelastomer storing time limit should be one year after production. If exceeding one year, these products should be retested, they could be used continuously after being retested up to grade.

Send a direct inquiry to this supplier

To:

Mr. Lion < ZHEJIANG FOTECH INTERNATIONAL CO., LTD >

Je veux savoir: