FOB Price
Obtenir le dernier prix( Negotiable )
|Minimum Order
Localité:
-
Prix de commande minimale:
-
Commande minimale:
1 Set
Packaging Detail:
Seaworthy Package
Delivery Time:
By Sea
Supplying Ability:
1 Set per Month
Payment Type:
D/P, D/A, L/C, T/T
Personne àcontacter Ms. Trista
8 Hongye Road,Yuhong,Qingbaijiang, Chengdu, Sichuan
1. Brief Introduction
SH***0/9.****5/*4 aluminum (aluminum alloy) rod continuous casting
and rolling line has our patent technology. There are many features
as convenient dismantlement, high production efficiency, low energy
consumption and good quality of aluminum (aluminum alloy) rod. It
can produce aluminum rod and φ 9.5 mm aluminum alloy rod in the
same situation.
It adopts process of continuous casting and rolling and produces
aluminum (aluminum alloy) rod of 9.5mm from aluminum ingot with the
casting sectional area of 2, **0 mm² . The raw material of aluminum
rod is common aluminum ingot while the raw material of aluminum
alloy rod is aluminum alloy ingot.
This line is composed of aluminum (aluminum alloy) refining
furnace, (holding furnace), filtration device (the equipment
mentioned above should be provided by the customer), Four-wheel
continuous casting machine, ancillary, continuous rolling mill,
quenching and collecting unit, oil emulsion cooling system, oil
lubrication system and electrical control system etc.
2. Process Flow
2.1 Raw Material
Aluminum ingot and other elements required
2.2 Process Flow
Feeding, melting and refining- (holding furnace)-filtration system-
launder-casting ladle-continuous casting (casting blank)-forward
pulling-casting blank treatment unit (automatic shearer, ingot
conveyer, straightening machine)-aluminum (aluminum alloy) bar
induction heating-entering rolling mill (automatic
feeding)-continuous rolling Oil refilling bag and leading duct
Aluminum alloy rod quenching device-backward hauling-rod orbital
coiler-finished product
2.3 Requirements for Production Circumstances
There are no special requirements for installation place.
(Altitude, climate and environment)
3. Main Technical Parameters
(1) Casting Sectional Area: 2, **0 mm²
(2) Aluminum (Aluminum Alloy) Rod Dia: φ 9.5mm
(3) Production Capacity: ~for alloy ***1: 3T/H
(4) Rolling Speed: 7m/s
(5) Height of Rolling Center: **2mm
(6) Overall Dimensions of Main Equipment: *0× 7.8× 5.1 m (L× W×
H)
(excluding aluminum melting furnace)
(7) Overall Weight of Main Equipment: Approx. *3t
(8) Power of Main Equipment: ~**0KW***0KW (excluding aluminum
melting furnace)
(9) Compressed Air Volume: 5~6m m³ /h
(*0) Amount of Cooling Water (Soft Water): **0 m³ /h
(*1) Amount of Emulsion: **0 m³ /h
(*2) Amount of Lubrication oil (*2#engine oil: *8 m³ /h)