FOB Price
Obtenir le dernier prix|
Minimum Order
Localité:
-
Prix de commande minimale:
-
Commande minimale:
-
Packaging Detail:
-
Delivery Time:
-
Supplying Ability:
-
Payment Type:
T/T, L/C, D/A, D/P
Personne àcontacter Agnis
18 Cihu East Road, Huangshi, Hubei
| Packaging Details: | sea-worthy standard or as custmoer required |
|---|---|
| Delivery Detail: | Within *0 days |
d3/1.***0/cr*2 forged flat cold work mould steel
| Equivalent grades | GB | DIN | AISI | JIS | ||||
| Cr*2 | 1.***0 | D3 | SKD1 | |||||
| Chemical Composition | C | Si | Mn | Cr | P | |||
| 2.***2.*0 | ≤0.*0 | ≤0.*0 | *1.****3.*0 | ≤0.*3 | ||||
| Available size | Round Bar | Diameter | Length | |||||
| *****0mm | ********0mm | |||||||
| Flat Bar | Thickness | Width | Length | |||||
| *****0mm | *****0mm | ********0mm | ||||||
| Surface condition | Black surface/ Grinded/ Machined | |||||||
| Annealed hardness | HB**0MAX | |||||||
| Characteristics | high strength, good hardenability and wear resistance | |||||||
| Applications | High performance cutting tools for steet upto 4mm thickness,trimming dies,blanking dies for paper and plastic ,shear blades for cutting light gauge materialthreat rolling dies,drawing,deep drawing,pressure pads and highly wear-resistant plastic moulds | |||||||
| Heat Treatment | Along with the furnace cooling after(**0~**0) °C× (3~4)h . (**0~**0)°C×(4~5)h, out air cold | |||||||
| Low impact toughness and should avoid tempering at about **0~***0°C | ||||||||
| Mechanical properties | Annealed Hardness: HB **9~**7 | |||||||
| Quenching Hardness: HRC *9~*3 | ||||||||
