Description
Galvanized steel coils are widely used in the construction
industry, as raw material for the production of corrugated panels,
fencing products, drywall panel profiles, ventilation systems etc.
Recommended for both outside and inside usage, galvanized steel has
a high resistance to corrosion in different environments, due to a
protective layer of zinc of *0 – **0 grams per square metre.
Hot-dip galvanized steel coils are produced by immersing steel in a
zinc bath. An appropriate galvanizing process requires a
pretreatment process during which the steel passes through
different baths which prepare the surface for zinc coating. In this
stage, chemicals are used to clean the surface of the steel. After
the chemical treatment, the steel coils pass through a bath of
melted zinc at temperatures around **0 ° C. The resulting uniform
coating is finished through a process of skin-passing to provide
smooth and shiny appearance of the finished product. To store for a
longer period, the hot-dip galvanized coils can be delivered with a
final oil coating, according to the customer’s demand.
Our hot-dip galvanized steel coils with very good workability at
further cold forming and bending processes.
Technical specification:
Zinc coverage: *****0 g/sqm on both sides (depending by the
requested specification);Thickness: between 0,2 mm and 1,*0
mm;Width: **0mm,**4mm,***0mm, ***0mm and ***0 mm;Coil weight: **6
mt;Coil ID: **8 mm;Coil OD: *******0 mm;
Depending on your usage, the hot-dip galvanized coil can be
delivered slightly oiled.
