Description
Fence size: **0 mm x *0 mm x 2.5 Meters x from
**0mm - ***0mm or available on request. Wire diameter and
tolerances
- Core diameter of the horizontal galvanized wires: 4.*0 ± 0.*6
mm.
- Core diameter of the vertical galvanized wires: 4.*0 ± 0.*6
mm.
- Diameter of PVC-coated horizontal galvanized wires: 5.*0 ±
0.*0mm.
- Diameter of PVC-coated vertical galvanized wires: 5.*0 ±
0.*0mm.
The tolerances are in accordance with EN ******2.
3.2 Tensile strength of the wire
Vertical wires: **0 to **0 N/mm².
Horizontal wires: **0 to **0 N/mm².
3.3 Mesh sizes and tolerances
Mesh spacing is measured between the centres of two neighbouring
wires:
- Distance between the horizontal wires : **0 ± 4,0mm,
- Distance between the vertical wires : *0 ± 3,0mm.
The tolerances are in accordance with EN ******7.
3.4 Welding strength
The average weld shear strength of 4 welds taken at random shall
not be less than *0% of the breaking strength of the vertical wire
(in accordance with EN ******7).
Post:
This system usually choose Square Post (*0**0mm, *0**0mm),
Rectangular Post (*0**0*2.5mm, **0**0*3mm), with the high strength
and so on. With plastic caps or Roofing rainhat.The finished
surface usually is Galvanized and Powder coating, or
alternatively.
Fastenings:
The panels and posts are jointed together with bolts or rivets,
using the steel flat bar, or special steel clamps, all nuts are
self-locking.This also can be designed as the special clients
requests.
