FOB Price
Obtenir le dernier prix10 ~ 100 / Piece
|Minimum Order
Localité:
China
Prix de commande minimale:
Commande minimale:
10 Piece
Packaging Detail:
in wooden boxes
Delivery Time:
30 days
Supplying Ability:
1000 Piece per Day
Payment Type:
T/T, L/C, D/P
Personne àcontacter Mr. Peter
North ZhongShan No.1 Road, Shanghai, Shanghai
ASTM A**5 P*2 is the part of ASTM A**5, The pipe shall be suitable
for bending, flanging, and similar forming operations, and for
fusion welding. The steel material shall conform to chemical
composition, tensile property, and hardness requirements.
Each length of pipe shall be subjected to the hydrostatic test.
Also, each pipe shall be examined by a non-destructive examination
method in accordance to the required practices. The range of ASTM
A**5 P*2 seamless alloy steel pipe sizes that may be examined by
each method shall be subjected to the limitations in the scope of
the respective practice.
The different mechanical test requirements for pipes, namely,
transverse or longitudinal tension test, flattening test, and
hardness or bend test are presented.Both ends of each crate will
indicate the order no., heat no., dimensions, weight and bundles or
as requested.
Chemical Requirements of ASTM A**5 P*2
| UNS Designation | K****0 |
| Carbon | 0.*7–0.*3 |
| Manganese | 0.*0–0.*0 |
| Phosphorus(max) | 0.*2 |
| Sulfur(max) | 0.*1 |
| Silicon | 0.*0 max |
| Chromium | 8.*0–9.*0 |
| Molybdenum | 0.*0–0.*0 |
| V | 0.***0.*5 |
| N | 0.***0.*7 |
| Ni (max) | 0.4 |
| Al(max) | 0.*2 |
| Cb | 0.***0.*9 |
| W | 1.**2.*0 |
| B | 0.****0.**6 |
| Ti (max) | 0.*1 |
| Zr(max) | 0.*1 |
Mechanical Properties of ASTM A**5 P*2
| Tensile strength, min, (MPa) | **0 |
| Yield strength, min, (MPa) | **0 |
| Elongation, min, (%), L/T | *0/… |
Material & Manufacture
Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below.
Heat Treatment
Mechanical Tests Specified of ASTM A**5 P*2
