Description
Description of pulley type
wire drawing machine:
The pulley type continuous wire
drawing machine is suitable for drawing a variety of medium and
thin fiber material, especially for mild steel wire, galvanized
iron wire, steel head wire, stainless steel wire, rubber hose steel
wire, spring steel wire, rod welding wire and copper wire aluminum
rod, etc.
Scope of application: gas-protection welding wire, welding
electrode, stainless steel wire, galvanized iron wire, bullet and
hard wire, copper wire, and metal product wire, etc.
Technical parameters of pulley
type wire drawing production line:
Model: LW***0
Material strength:
***0Mpa
Max. block number: 9
Max. dia. of material: 6.5
mm
Min.dia. of material: 1.8
mm
Block dia.: **0mm
Max. average condensation:
*5%
Total Compressibility:
*2.*3%
Max. speed of block:
**5m/min
Total power: ****8.5kw
Machine weight: ***0
kgs
Single block size (mm):
***0****0****0 mm
Usage of pulley type
continuous wire drawing machine:
The set of the machine is ideal equipment drawing wire stock of
high, medium and carbon steel, as well as copper, aluminum and
alloy. The machines are applied to drawing wire in the factories
such as wire-steel factory, metal mesh factory and nail making
factory etc.
Structure of high speed super fine machine:
The pulley type wire drawing equipment consists of main reduction
box.die casing, wheel frame, sash brace and electrical control
system. The spinning drawing blocks are driven by JZT series motor,
with gear coupling runs changeful gears to reduce speed. The
drawing blocks are vertically fixed in sealed box body. The gear
pairs are lubricated with oil.
In order to lower residual heat on
the surface of the block, the cooling means is installed in
interval of the block. To reduce its working temperature, the
machine is soaked in cooling water. The machine runs with carvel or
linkage. The safety halt gear is installed by the position of
operating block.
