FOB Price
Obtenir le dernier prix0 ~ 5
|Minimum Order
Localité:
China
Prix de commande minimale:
-
Commande minimale:
1000 Kilogram
Packaging Detail:
4 tins in one carton
Delivery Time:
2 weeks
Supplying Ability:
150000 Kilogram per Month
Payment Type:
T/T, L/C, Other
Personne àcontacter Ms. Jack
Getou Industrial Park, Matou Township, Nanan, Quanzhou, Fujian
TRIO-CHEM Screen Printing PU Ink (SN Series )
technical data sheet
Category: SN series
Place of Origin: Quanzhou, Fujian, Mainland China
Brand Name: Hello Chemicals Guru*-HCG
Certification: EN**1 Part 3; RoHS
Chemical Nature: Solvent-based ink system
Viscosity: **0P for regular type
Particle Size: 9μm (*5%)
Gloss: *0
Solid Content: *5%
Coverage: dependent on ink viscosity, mesh size and hole configuration, etc.
Usage Properties: superior adhesion, good flexibility and elasticity without sticky hand feeling, good abrasion, scratch & scuff resistance.
Thinner: ketone type organic solvent, adjusting to desired drying speed.
Printing Process: stir well before use, then screen print with PU squeegee blade in shore hardness of *5 to *5 through polyester screen mesh to the substrate (For manual operation). Full air dry requires a minimum **-hour cure time. This ink system also works well with transfer printing and spray painting process.
Suitable Substrate: various genuine and artificial leather finishes, nubuck, Nylon & Tetoron cloth products, waterproof nylon fabrics, nylon webbing, bag fabrics, PU leather ,PET fiber, PA fiber, etc.
Packing: 1kgs/tin; 5kgs/tin, *0kgs/drum
Storage: for maximum shelf life, keep the packing containers closed and store in a cool environment between 5°C and *5°C, out of direct sunlight and away from any open flame.
Attention: solvency of the thinner is required to be monitored for specific working conditions. More tests are required to be made with some substrates of specially waterproof treatment. Special additives available from TRIO CHEM are recommended for adhesion enhancement.
Disclaimer: TRIO-CHEM ink series comply with a wide variety of regulations and standards like EN**1 Non Heavy Metal Content and RoHS. For specific compliance information on more regulations and standards, please contact us for assistance.
Please note that substrates to be printed must be tested for suitability with our ink system prior to production runs being carried out. Always test application fully before beginning production run as there is often considerable variance in substrates from different manufacturers and even between different batches. All information is given in good faith but without warranty expressed or implied. All products are supplied in accordance with our Terms & Conditions of Trading.
