FOB Price
Obtenir le dernier prix|
Minimum Order
Localité:
China
Prix de commande minimale:
-
Commande minimale:
-
Packaging Detail:
45g/pc, 85g/pc tube packing.
Delivery Time:
25days
Supplying Ability:
-
Payment Type:
L/C, T/T
Personne àcontacter Mr. Andy
Lansi Road, Changsha National Biomedical Bases, Liuyang,, Changsha, Hunan
Feature
The product is one kind of sulfur
silicone sealant with one acid component which could be applied at
any climate and could take chemical reaction with the water in the
air rapidly. Good aging-resistant ability, high flexible, perfect
performance of high or low temperature resistant. Color: Clear,
black, grey, blue, red.
Scope of Application
This product used for gear case,
fore-and-aft board, water pump of car, auto bike, plane flange,
cover board of other machine equipment.
Using Method
1. Clean the surface to
get rid of the rust, oil, or any dirty.
2. Stick temporary band to protect the surface after
cleaning, and move the band off after applying of the glue.
3. Cut the bottleneck and fix the nozzle on, then, cut the
tube along the seam width.
4. Extrude the glue on the place to be sealed after fixing
the glue bottle on the gun. To promise the glue to be even and no
stopping, keep the extrusion continuous and the nozzle of the spray
gun move slowly. Bubbles or holes would enter if the gun moves too
quickly.
5. About *0 minutes later, to be dry. Keep the thick during
assembling. Would set after *4 hours at normal temperature.
Warning
1. It is not preferred for
the applying at the air-tight situation. Keep ventilative during
the operation as the acetic acid is released due to the chemical
reaction.
2. No toxic of product. But be careful not to make the glue
get into the eyes or nose. Wash them at once if does.
3. Keep smooth and continuous during applying of the glue
onto the sealing surface. The adhesive performance would be not
good if the air get in.
4. Tighten the lid at once and take off the extrusion nozzle
after gluing to avoid entering of the wet air and causing of the
solidifying. Eliminate the remnants around the nozzle.
5. Operate at ***0Centigrade and humidity of ****0%.
Storage and Packing
1. The product is
nonflammable. Keep dry and shade during storage. The shelf life is
9 months in room temperature.
2. Packing specification: *5g/pc tube packing.
