FOB Price
Obtenir le dernier prix|
Minimum Order
Localité:
China
Prix de commande minimale:
-
Commande minimale:
-
Packaging Detail:
28g/set, 56g/set, 30g/set, 12sets/inner, 12inners/ctn
Delivery Time:
25days
Supplying Ability:
-
Payment Type:
T/T, L/C
Personne àcontacter Mr. Andy
Lansi Road, Changsha National Biomedical Bases, Liuyang,, Changsha, Hunan
Feature:
8 Minutes Rapid Clear Epoxy Adhesive
is based on the room temperature, having the features of: (1)
solidifying within *0 minutes, (2) suitable for small parts and
structural strength (3) can be used after three hours (4) quick set
and high adhesive performance (5) can be lacquered and waxed (6)
not suitable for the joint of shaking place, (7)joint layer is
fragile
Main Component:
A component is the modified
Epoxy Resin, B component is modified amine solidify
Scope Of Application:
The products of this
series are widely used for bonding iron, casting iron, steel,
aluminum, glass etc. Mainly used in material cementation, the seal
and patching of architecture material, the automobile spare part,
the electronic component assembly, the gem jade carving, the
handicraft and so on.
Using Method:
1. The surface
should be clean and dry, without oil or wax
2. Take down the cap, pierce the seal, squeeze out evenly
(A:B=1:1.2:1). cover the surface with glue based on the mixing of
the two components evenly,
3. Press it according to the actual condition. it could achieve the
using intensity after the solidifying for three hours during the
normal temperature, it is suggested to operate at above *0℃.
Warning:
1. It must be even for the mixing of the two components during the
adjusting of the glue. Quantity should not excess too much.
2. Tighten the caps after usage .Do not mix the cap of part A and
B.
3. Wash the additional glue on the hands or the surfaces of bonding
materials by alcohol before its solidifying.
4. Avoid touching with the eyes and skin directly. If getting
touch with the skin, please wash them at once by using of a cloth
with dipping of alcohol before solidifying, then, clean them by
soap and warm water. If getting touch with the eyes, please wash
them immediately with plenty of water, and see the doctor for
serious situation.
5. Take strict precautions against touching by the kids and
entering into the mouth.
Storage And Packing:
1. Stock the products
with air-tight seal in the environment of shade and dry. The
shelf life is one year. It is available to use based on
passing of the test if being beyond the shelf life.
2. Preserve and transport as non dangerous products.
3. Packing specification: *8g/card, in tube.
