FOB Price
Obtenir le dernier prix|
Minimum Order
Localité:
-
Prix de commande minimale:
-
Commande minimale:
-
Packaging Detail:
-
Delivery Time:
-
Supplying Ability:
-
Payment Type:
-
Personne àcontacter Loris
NO.1 Yun`an Road,Civilian&Technology Park,Taihe,Baiyun District, Guangzhou, Guangdong
Typical
Characteristic
Durometer - Shore A: *9 Shore A
Room Temperature Cure - Days: 7 Days to *4
Days
Service Temperature High: **0 Deg C to *0 Deg
C
Joint Movement Capability: ±*5
Shelf Life: 9 month
Elongation: ≥**0
Working Time: 0~*0 Minutes
Tack-Free Time**0% RH: *0 Minutes
Full Adhesion Time: *4 Days to *1 Days
CHARACTERISTICS
Extension/compression movement
capability of up to ±*5% of the original joint width
Suits applications in the areas with large difference in
temperature and low humidity
Odorless, non-corrosive cure system
Excellent weatherability and high resistance to ultraviolet
radiation, heat and humidity, ozone and temperature extremes
Remains flexible over a temperature range of **5°F (**8°C) to **0°F
(**1°C)
Excellent unprimed adhesion to wide range of substrates including
coated, enameled and reflective glasses, anodized and polyester
coated or painted aluminum profiles including most
fluoropolymerbased paints
Good compatibility with other neutral silicone sealants
APPLICATIONS
Weather sealing in glass curtainwall joints;
Weather sealing in metal, enamel curtainwall joints;
Sealing in expansion joints for concrete, plastic and metal
etc.;
Sealing in roof joints;
Many other uses.
Conform to
Standard
United States Regulations: ASTM
(American Society of Testing and Materials International) ->
ASTM C **0,Type S,Grade NS,Class *5,Use NT,A,G,M,O
European Regulations: ISO*****-G**5HM
China Regulations: *5HM JC/T*******1
LIMITATIONS
SS**1 Silicone Weather-Proofing Sealant should not be used, applied
or is not recommended:
In structural glazing applications or where the sealant is intended
as an adhesive.
In areas where abrasion and physical abuse are encountered.
In totally confined spaces as the sealant requires atmospheric
moisture for cure.
On frost-laden or damp surfaces
To building materials that bleed oils, plasticizers or solvents
materials such as impregnated wood, oil-based caulks, green or
partially vulcanized rubber gaskets or tapes.
On PMMA,PC substrates
In below-grade applications
On substrates made of polypropylene, polyethylene, polycarbonate
and polytetrafluoroethylene.
Where movement capability greater than ±*5% is required.
Where painting of the sealant is required, as the paint film may
crack and peel
For structural adhesion on bare metals or surfaces subject to
corrosion (i.e., mill aluminum, bare steel, etc.)
To surfaces in contact with food
For use underwater or in other applications where the product will
be in continuous contact with water.
