Description
Features:
This is a new
type environmental friendly product, owning the natural color, soft
sight, low cost price and easy operation, through different method
to achieve the various art effects, make a new way for the modern
indoor and outdoor wall decoration, meet the development
requirement of “safety, environmental friendly,
energy-saving”
1, strong
cohesive force, good anti-weather function, ensuring the permanent
adhesive for the light building
materials
2, various
color, customers can choose their favorite color
3, good
ventilation, low water absorption rate, small shrinking rate, good
anti-infiltration
4, convenient
shape, can make different shapes from plane to
three-dimensional
5, washing
resistance, anti-dirt, self-clean
function
6, simple
apply, quick operation, reduce materials and
price
7, non-toxic,
no pollution, safety and environmental
friendly
Surface
Treatment:
the substrate
surface should be firm, dry and clean, no grease, and other loose
materials.
Application:
For indoor and outdoor
wall decoration (can creative in producing a smooth surface of
plaster, fantasy relief, brushed paint and other artistic
three-dimensional pattern in the coating bump)
Operation
Process:
For the
surface:
1, for
spraying method:
mix the color
mortar with water at the rate of 1:0.***0.4, pouring water into the
stirring barrel, then the powder, using an electric mixer. Using
spraying gun to spray the mortar on the surface, at least two times
(third time is the best), control the interval time about 2h. after
the dry *2~*4h, spray the MB special anti-dirt
agent
2, for
spreading method:
mix the color
mortar with water at the rate of 1:0.***0.4, pouring water into the
stirring barrel, then the powder, using an electric mixer, put it
aside for *0min, gain the better effect. Using scraper to scrap the
mortar on the surface, control the thickness about 2~3mm. after
*0min can use various texture tools to roll patterns. After the
patterns about ****4h, spraying **2 times of the MB special
anti-dirt agent
Normal
Amount:
For the
spraying: about 2.0~2.5kg/m2; For the spreading: about
2.0~2.5kg/m2; For the trowel operation: about
3~4kg/m2
Cautions:
1, make sure the smooth
and vertical rate of the surface before
operation
2, use up the new mixed
slurry , if the mortar surface is dry, pick off the
surface
3, never mix the dry
slurry with water and use again
4, roof should extend *0
cm by the wall, to avoid direct polluted water
5, this product requiring
the temperature between 5℃ to
*0℃
6, never operate under
raining
7, for various art effect,
consulate our company or related department for the specific
operation process
Store Method:
Store in cool and dry place,
unopened product can be saved for one year.
Packing:
2kg/bag, *5kg/bag
Features:
This is a new
type environmental friendly product, owning the natural color, soft
sight, low cost price and easy operation, through different method
to achieve the various art effects, make a new way for the modern
indoor and outdoor wall decoration, meet the development
requirement of
