FOB Price
Obtenir le dernier prix4.8 ~ 7.89 / Kilogram ( Negotiable )
|Minimum Order
Localité:
-
Prix de commande minimale:
Commande minimale:
200 Kilogram
Packaging Detail:
25kg/drum and 200kg/drum
Delivery Time:
within 3 days silicone will be delivery after gett
Supplying Ability:
8000 Kilogram per Day
Payment Type:
L/C, T/T
Personne àcontacter Ms. JoJo
Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Long Gang district, Shenzhen, Guangdong
Usage:
Shoe soles mold, pouring mold, sand casting.
Characteristics:
-An exceptional
fluidity and good operability, easy to remold
-Cures at
room temperature within 3-4 hours
-Good tensile and
tear strength, low shrinkage
-Good resistance
to weather, temperature, aging, acid
Description:
HY-218 silicone
rubber is mainly used for shoe molds, sand casting, sole sampling,
plaster models, simple products, products with non-complex
patterns, as well as product models with stable size and
non-deformation.
Standard Datasheet:
|
Model |
Appearance |
Viscosity (cps) |
Hardness (A°) |
Tensile Strength (Mpa) |
Tear Strength (KN/m) |
Elongation (%) |
Mixing ratio (%) |
Pot life(H) |
Demould time(H) |
|
218 |
White |
11000±2000 |
18±2 |
≥1.8 |
10±2 |
≥250 |
2~3 |
0.5~2 |
2~4 |
Using Instruction:
　　Component A is white flowing liquid and component B is the curing agent. For example, take silicone rubber of 100g and add 2% curing agent for mixing evenly. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame.
Note:
The product is used for pouring or brushing technique. That is to say, fix the product or sole model to be duplicated onto a plane plate, then enclose the plane frame with wooden plates to prevent the leakage of the silicon, mix the silicone rubber and the curing agent evenly according to the mixing ratio of 100 : 2 and pour them onto the sole model, then brush evenly with a wooden plate or a brush, and fill up the mold frame with gypsum after the silicone rubber is dried.
Storage and Precautions:
　　The
product, which is an environmentally-friendly liquid silicone
product, is not easy to burn and can be stored and transported as
non-hazardous goods. The shelf life of the product is about one
year from the date of production. Inspection is required when
exceeding the time limited. It can continue to be used in case of
neither thickening nor deterioration.
