ROSIN MODIFIED CNSL RESIN By S.B.Polymers, India
Pas encore membre de TradeKey.com? Inscrivez-vous pour vous connecter avec 9 millions d'importateurs et exportateurs.
Rejoignez-le maintenant c'est gratuit |
BOOK A CALL
Book Call On Your Favorite Time

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services

Contact Us
ROSIN MODIFIED CNSL RESIN

ROSIN MODIFIED CNSL RESIN

|

Minimum Order

Localité:

-

Prix de commande minimale:

-

Commande minimale:

-

Packaging Detail:

-

Delivery Time:

-

Supplying Ability:

-

Payment Type:

-

Contacter maintenant
Membre gratuit

Personne à contacter Mr. SWAPNIL

159,mahagujarat industrial estate., ahmedabad, gujarat

Contacter maintenant

Description

Technical note : SBP***3 This is a CNSL resin modified with Rosin and supplied in *0%, *0% and *0% solids. Specification : Colour – reddish brown Clarity – clear Gel tail – absent Viscosity (*0% in MTO at *0degree in fordcup no 4 ) – *5 to **0 seconds Finish on hegman guage – 5+ Non volatile - solids as specified Specific gravity – 0.***0.*6 Acid value – less than *2 MTO tolerance – 1:infinite Scratch hardness air dried : ***0 gms Flexibility & adhesion : good DRYING TIME : Surface dry : *0 min Tackfree dry : 2 hours Hard dry : **6 hours Solubility: MTO , TOLUENE, KETONES, ESTERS, NAPHTHAS ETC. RECOMENDED DRIERS : LEAD 0.5%, COBALT 0.1%, MANGANESE 0.*5% as metals on the solid content of the resin are recommended. If required the proportion of the manganese can be increased upto 0.3% for better effects. After addition of the driers ageing for *4 hours is recommended Chemical resistance : The film is resistant to water , acid (2% H2SO4) and alkali (1% sodium hydroxide) and 5% sodium bi-carbonate solution and gives good anti corrosive properties. Recommended USES: It can be used in 1. Off white general purpose paints. 2. Enamels. 3. In all types of redoxide metal primers because the resin is having good water, chemical & corrosion resistance. 4. In baking & air drying . 5. Hard gloss synthetic dark colored enamels. 6. Insulating varnishes & printing inks . Packaging : **8kgs/*8kgs drums This product can be supplied as per customer choice if any or against different specification . Caution : CNSL resins & varnish should not be ground with all types of inorganic pigments as a safety measure to avoid fattening & further polymerisation of the end product . to avoid this problem varnish & pigment should be ground separately in case of pigments like zinc chrome, persiun blue, lemon chrome etc.

Send a direct inquiry to this supplier

To:

Mr. SWAPNIL < S.B.Polymers >

Je veux savoir: