FOB Price
Obtenir le dernier prix|
Minimum Order
Localité:
-
Prix de commande minimale:
-
Commande minimale:
-
Packaging Detail:
-
Delivery Time:
-
Supplying Ability:
-
Payment Type:
-
India
Personne àcontacter Mr. SWAPNIL
159,mahagujarat industrial estate., ahmedabad, gujarat
Technical note : SBP***1 This is a cnsl resin / medium is supplied in **0%, *0%, *0% solid. Specification : Colour – reddish brown Clarity – clear Gel tail – absent Viscosity (*0% in MTO at *0degree in fordcup no 4 ) – *5 to **0 seconds Finish on hegman guage – 5+ Non volatile - solids as specified Specific gravity – 0.*0±0.*2 Gloss – *0 minimum MTO tolerance – 1:infinite Flexibility & adhesion : good DRYING TIME : Surface dry : *0 minutes Tackfree dry : *0 minutes Hard dry : **5 hours Solubility: MTO , TOLUENE, KETONES, ESTERS, NAPHTHAS ETC. RECOMENDED DRIERS : LEAD 0.5%, COBALT 0.1%, MANGANESE 0.2% as metals on the solid content of the resin are recommended. If required the proportion of the manganese can be increased upto 0.3% for better effects. After addition of the driers ageing for *4 hours is recommended Chemical resistance : The film is resistant to water , acid (2% H2SO4) and alkali (1% sodium hydroxide) and 5% sodium bi-carbonate solution and gives good anti corrosive properties. Recommended USES: It can be used as a medium for 1. Dark colored enamels. 2. Red oxide metal primers. 3. Redoxide both gloss and matt finishes. 4. Black enamel. 5. Red oxide. 6. Zinc chromate primer. 7. Olive green and anti corrosive paints. Packaging : **8kgs/*8kgs drums This product can be supplied as per customer choice if any or against different specification . Caution : CNSL resins & varnish should not be ground with all types of inorganic pigments as a safety measure to avoid fattening & further polymerisation of the end product . to avoid this problem varnish & pigment should be ground separately in case of pigments like zinc chrome, persiun blue, lemon chrome etc.
