FOB Price
Obtenir le dernier prix|
Minimum Order
Localité:
GUANGDONG
Prix de commande minimale:
-
Commande minimale:
500BOXES
Packaging Detail:
-
Delivery Time:
-
Supplying Ability:
-
Payment Type:
-
Personne àcontacter Mr. Wu
Shunjing, Foshan, Guangdong
- KALI ***0 belongs to RTV*1, acetoxy cure, high tensile strength, fast curing. Translucent, no change of color. - Excellent resistance to weather. - Excellent resistance to low and high temperature change. Little changes of performance at ***0C ~***0C; Purpose: - Sealing in glass joints; - For structural glazing in glass curtain wall. - For structural glazing in big glass and glass roof structural engineering. â?? Application Standard: - China Standard GB/T *********3 Silicone Building usages Sealant â?? Restriction of Usage: - Can&#**9;t be used to marble, granite and other alkalescence materials; - Unsuitable for the surface of all kinds of material that can effuse grease, plasticizer or solvent; - Unsuitable for the airproof location, because it is required to absorb moisture in air to cure for the sealant; - Unsuitable for the frosty or moist surface; - Unsuitable for the continually soggy or moist place; - Can&#**9;t be used the product, if the temperature is below *0C or above **0C on the surface of the materials. â?? Satefety: - Non-toxicity when cured. - Avoid eye contact before curing. If happened, rinse opened eye for several minutes under running water, then consult with a doctor. - Keep away from children. - Ensure adequate ventilation at workplace or curing area. â?? Storage Keep in dry place and keep a storage temperature below *5â?? to prolong its service life; *2 months guarantee. â?? Packing Specification: *0ml, *0ml by alumunium tube with blister, **0ml, **0ml, **0ml, **0ml by plastic cartridge; **0 KGS by drum â?? Optional Color: Black, white, transparent, silver-grey or appointed color of clients â??Testing Standard: GB/T*********3 ã??Silicone Building Sealantã?? NO. Item Data 1 Type Acetoxy 2 Density ïÂ&frac*4;?g/cm3ïÂ&frac*4;? 1.*4 3 Capacity movement ±*0% 4 Skin formation **8 minutes 5 Curing Rate (2mm/h) **6 6 Drying(4mm/h) ***2 7 Max. Tensile strength 2.5 8 Hardness (shore A) *5±2 9 Elongation at Break(%) â?Â¥**0 *0 Modulus Mpa(**0%) 0.*6 *1 Application temperature **0â?? to **0â?? *2 Temperature resistance **0â?? to ***0â?? *3 adhesive OK *4 Weatherproof OK *5 Cold-hot adhesive OK *6 Under water adhesive OK *7 Elastical Recovery*6 *8 Mass-loss Rate 5 Skin drying time and fully drying time under: *3â?? and *0% humidity.
