FOB Price
Obtenir le dernier prix|
Minimum Order
Localité:
CHINA
Prix de commande minimale:
-
Commande minimale:
1 Set
Packaging Detail:
-
Delivery Time:
30
Supplying Ability:
20 Set per Month
Payment Type:
T/T
Personne àcontacter Mr. John
No.2,1st meihaocun ,No.97 Nanhai North Ave, Futian, Guangdong
The belt filter press is a continuous-feed dewatering device that
applies chemical conditioning, gravity draining, and mechanical
pressure to dewater sludge. The sludge/slurry is sandwiched between
tensioned belts and rolls, by passing those belts through a
serpentine of decreasing diameter rolls to remove the moistures and
then dispose of the sludge cake.
Advantages and characteristics of belt press
1. Continuous and fully automatic operation
2. High reduction of sludge volume for saving of transport cost
3. High dewatering performance due to an conveniant
arrangement of the rollers
4. Using the latest advanced technology, add one more
independent concentrated device based on normal type belt press,
significantly increased the ability of water removal.
5. ***5% lower flocculation consumption with combination of dynamic and static flocculation reactor.
6. High working capacity(**0% of normal type), low moisture content of filter cake(*0% less than normal type), low working cost(*0% lower than normal type)
7. The frame is made of high quality seamless square steel pipe(*0#**2#) with sandblast and high strengh fluorin-carbon finish, makes anticorrosive ability keep more than 8 years.
8. The main body are made of stainless steel(**4), including main and assistant rollers, fender, flume, waterproof cover, muzzle and sheets, etc.
9. High quality bearing with full airproof bearing seat, available to run more than 3 years.
