Zhangjiagang Mulrich Co.,Ltd.

SPECIFICATIONS:        â—† Thickness: Maximum 1.00mm â—† Sheet

s are a new decorative material. Compared with other decorative materials, it has much incomparable superiorit

Base Material: (1) Hot Dipped Galvanized Steel; (2) Prepainted Steel　  â—†Thickness: 0.14mm-

Base Material: Al-Zn Coated Steel (known as Zincalume or Galvalume Steel);  Thickness: 0.4mm-0.5mm ââ€

Specifications 1. Thickness: 0.14mm-0.80mm 2. Width: 600mm-1250mm 3. Length: As your required  

SPECIFICATIONS: Ã£â‚¬â‚¬   â—†Grade: SGCC, DX51D,  S350GD, SGHC â—†Width:

SPECIFICATIONS:        â—†Thickness: Maximum 1.00mm â—†Sheet fo

Name: Prepainted  Steel 1. Base material: GI, Aluzinc, and CR 2. Thickness: maximum 1.00mm 3. Width:

Name: Aluzinc / Galvalume Steel 1. Standard: DX51D, SGCC, G550, G300... 2. Thickness: maximum 2.50mm 3. W

Name: Aluzinc / Galvalume Steel 1. Standard: DX51D, SGCC, G550, G300... 2. Thickness: maximum 2.50mm 3. W

SPECIFICATIONS:　　  â—†Grade: G550,  G300, SGCC, DX51D â—†Thickness: m

Name: Prepainted  Steel 1. Base material: GI, Aluzinc, and CR 2. Thickness: maximum 1.00mm 3. Width:

Name: Prepainted  Steel 1. Base material: GI, Aluzinc, and CR 2. Thickness: maximum 1.00mm 3

Base material: (1)Cold Rolled Steel; (2)Hot Dip Galvanized Steel â—†Width: No more than 1250mm ââ

Name: Prepainted  Steel 1. Base material: GI, Aluzinc, and CR 2. Thickness: maximum 1.00mm 3. Width:

Name: Prepainted  Steel 1. Base material: GI, Aluzinc, and CR 2. Thickness: maximum 1.00mm 3. Width:

Name: Prepainted  Steel 1. Base material: GI, Aluzinc, and CR 2. Thickness: maximum 1.00mm 3. Width:

Name: Hot Dipped Galvanized Steel 1. Standard: DX51D, SGCC, S350GD, S280GD... 2. Thickness: maximum 5.00mm

Specifications Name: PCM Steel 1. Base Material: GI, Aluzinc, and CR 2. Thickness: maximum 1.

Specifications 1) Thickness: 0.35mm 2) Width: 1190mm 3) Also some customers prefer 0.60mm, width of 1524m

Whiteboard Writing Surface Material is used for making Whiteboard and Chalk Board. We have implemented an

Specifications 1. Thickness: 0.14mm-0.80mm 2. Width: 600mm-1250mm 3. Length: As your required  

Base material: (1)Cold Rolled Steel; (2)Hot Dip Galvanized Steel â—†Width: No more than 1250mm ââ

 usually covered with polyester paint material baked on its surface. It is widely used as roof tile, ceil

Specifications: 1. Base Material: GI, Aluzinc, and CR   2. Thickness: maximum 1.00mm 3. Width:

SPECIFICATIONS:        â—† Thickness: Maximum 1.00mm â—† Sheet

Specifications: 1. Thickness: maximum 2.00mm 2. Width: ≤1250mm 3. Grade: Q195, Q195L, SPCC, SAE1006-10

SPECIFICATIONS:　　  â—†Grade: G550,  G300, SGCC, DX51D â—†Thickness: m

SPECIFICATIONS: Ã£â‚¬â‚¬   â—†Grade: SGCC, DX51D,  S350GD, SGHC â—†Width:

Specifications 1. Thickness: 0.14mm-0.80mm 2. Width: 600mm-1250mm 3. Length: As your required  

Base Material: Al-Zn Coated Steel (known as Zincalume or Galvalume Steel);  Thickness: 0.4mm-0.5mm ââ

Base Material: (1) Hot Dipped Galvanized Steel; (2) Prepainted Steel　  â—†Thickness: 0.14mm-

Base Material: Al-Zn Coated Steel (known as Zincalume or Galvalume Steel);  Thickness: 0.4mm-0.5mm ââ

Name: Hot Dipped Galvanized Steel 1. Standard: DX51D, SGCC, S350GD, S280GD... 2. Thickness: maximum 5.00mm

Base Material: (1) Hot Dipped Galvanized Steel; (2) Prepainted Steel　  â—†Thickness: 0.14mm-

Base Material: Al-Zn Coated Steel (known as Zincalume or Galvalume Steel);  Thickness: 0.4mm-0.5mm ââ€

Specifications: 1. Thickness: maximum 2.00mm 2. Width: ≤1250mm 3. Grade: Q195, Q195L, SPCC, SAE1006-10

s are a new decorative material. Compared with other decorative materials, it has much incomparable superiorit

SPECIFICATIONS:　　  â—†Grade: G550,  G300, SGCC, DX51D â—†Thickness: m

SPECIFICATIONS: Ã£â‚¬â‚¬   â—†Grade: SGCC, DX51D,  S350GD, SGHC â—†Width: