Taixing Expansion Marine Equipment Co., Ltd.

Model: D(Y)ME-40 Dia of chain: 40mm Working load: 68kN Overload pulling force: 102kN Holding load: 402kN

Towing winch is applied on tugs and mainly used for vessel towing. Our winch is fully meet with class standard

Feature: large reduction ratio, compact construction, easy mounting & disengaging, steady in rolling and l

Model: YB-160/0.25 Drum load: 16t Nominal speed: 15m/min Holding load: 47t Dia of rope: 32mm Capacity of

YQ6006 Safe working load: 6t Working radius: 2-6m Hoisting height: 25m Hoisting speed of rope: 20m/min Lu

Feature: compact construction, excellent property, safe & reliable, easy operation, long service life. Sp

Local and remote control, easy operation Single drum or double drum. auto spooling. Brake: spring loaded, hy

mooring system for sea-going vessels, working barge, etc. 8-points, 4-points, 12-points available. Easy operat

This products applies to leading hawser for mooring of workships and channel railway ships. Usually A type fo

Model: DC/M3012 Safe Working Load: 3t Working radius: 1.8-10m Hoisting height: 12m Hoisting speed of rope:

Model: DS80 Max working load: 80kN Lifting Load: 30kN Lowering load:40kN Hoisting speed of rope: 10m/min

Necessary fittings for windlass and prevent anchor chain from moving after windlass anchoring or heave-up oper

Necessary fittings for windlass and prevent anchor chain from moving after windlass anchoring or heave-up oper

Necessary fittings for windlass and prevent anchor chain from moving after windlass anchoring or heave-up oper

Applying for anchor winch to lead anchoring rope to suit anchoring position and prevent from damage hull struc

Applying for anchoring operation. Can also be designed for 4-point or 8-point mooring system for working barge

Applying for anchor operation. Warping head can also act for mooring operation. If required, mooring drums can

Applying for mooring operation and/or anchoring operation. Compact design for limit space and small vessels.

Mooring operation of vessels at dock. Can be designed for wire rope and mooring rope. Easy operation and low m

Necessary fittings for windlass and prevent anchor chain from moving after windlass anchoring or heave-up oper