Prix FOB
Obtenir le dernier prix5.12 USD / Piece
|2 Piece Minimum Order
Pays:
China
N ° de modèle:
VN-SC1600-U01
Prix FOB:
5.12 USD / Piece Obtenir le dernier prix
Localité:
China
Prix de commande minimale:
5.12 per Piece
Commande minimale:
2 Piece
Packaging Detail:
In exporting wooden case
Heure de livraison:
5-8days
Capacité de Fournir:
40000 Piece per Month
Payment Type:
PayPal, Money Gram, Western Union, D/P, D/A, L/C, T/T
Groupe de produits :
Personne àcontacter Mr. Jarry
High-tech Industrial Park, Zhengzhou, Henan
U Type Silicon Carbide SiC heating elements up to 1600CÂ
VINER Industrial U type Silicon Carbide SiC
heating elements are made from high-density, high-purity Silicon
Carbide, which is the most popular type of economical heating
element capable of operating under hot and
rigorous environments.
VINER Industrial Silicon Carbide SiC heating elements U
type Features:
1. Withstands as high as 1600C (surface temperature)
2. Generates high heat output per unit surface area, approximately 5-10 times than  the output of Nichrome wire
3. High strength and excellent shock resistance
4. Heat source is free of noise and air pollution
VINER Industrial Silicon Carbide SiC heating
elements U Type Advantage:
1. Selecting high purity green SiC powder, to
ensure best foundation for top quality.
2. SiC heating elements are extruded by 500T
press machine, to ensure high density uniform through whole
length.
3. Excellent resistance rate between heat zone
and cold zone, to avoid over-temperature of cold zone to damage
furnace body.
4. Special technology to spread a protect film on the surface of
hot zone, which enhance the Antioxidant property evidently and
lengthen the service life.
VINER Industrial Silicon Carbide SiC heating
elements SiC heater Specifications:
When you place an order of the VINER Industrial
Silicon Carbide SiC heating elements, please give following
information:
OD: Outer Diameter;
HZ: Length of Hot Zone;
CZ: Length of Cold Zone;
OL: total Length
Order Sample of the VINER Industrial SiC heater
U type Silicon Carbide SiC heating elements
U type: OD=20mm, HZ=300mm, CZ=400mm, OL=700mm,
A=60mm,
Resistance 2.24 Specify As:
S-U,20/300/700/60/2.24
VINER Industrial Silicon Carbide SiC heater SiC
heating elements Technical Parameters:
VINER Industrial Silicon Carbide SiC heater SiC
heating elements U Type:
ED (Rod,Straight)Â type,
UÂ type,
WÂ type,
Ltype,
Slot type,Single Spiral, Double Spiral, UX
typ
Notes for Using and Installing VINER Industrial
SiC heater Silicon Carbide SiC heating
elements:
1. Heater should be protected against damp
during storing or installing to ensure the performance of the
heater.
2. In order to be sure of well-distributed lod
of each and groups, heater should be divided before assembling. The
tolerance of the resistance of each one cannot exceed by 10% each
other.
3. Heater is hard and brittle, please be
careful when assem bling and maintaining so as to avoid
damage.
4. When operating the electric furnace at the
beginning, the voltage should be increased slowly and cannot be
fully loaded at once. Otherwise the larger current will be resulted
in the damage of heater
5. When heater is damaged and need to be
changed, the resistance of new ne should follow the increasing
resistance. If many are damaged or resistance increased too much,
heater should be changed.
6. Silicon Carbide (SiC) heating elements is a
non-metal electric heating element made from SiC as its main raw
materials. It has some specific properties, such as low expansion
coefficient, little deformation, stable chemical property, long
service life, easy installation and maintenance,
etc.
VINER Industrial Silicon Carbide SiC heater SiC
heating elements Application:
VINER IndustrialSilicon Carbide (SiC) heating elements can
usually make use for furnace which temperature from 600-1600. It
can be directly used in an air atmosphere, without any protection
atmosphere. It is extensively used in the fields of metallurgy,
ceramics, glass, machinery, analysis test, semiconductor, science
& research and so on.
|
VINER Industrial Packaging: Plastic paper inside, Polyfoam filled, Wooden box outside. |
| Pays: | China |
| N ° de modèle: | VN-SC1600-U01 |
| Prix FOB: | 5.12 / Piece Obtenir le dernier prix |
| Localité: | China |
| Prix de commande minimale: | 5.12 per Piece |
| Commande minimale: | 2 Piece |
| Packaging Detail: | In exporting wooden case |
| Heure de livraison: | 5-8days |
| Capacité de Fournir: | 40000 Piece per Month |
| Payment Type: | PayPal, Money Gram, Western Union, D/P, D/A, L/C, T/T |
| Groupe de produits : | SiC heating element |
