1600C U Type Silicon Carbide Heating Elements (ISO9001) By HENAN VINER INDUSTRIAL CO., LTD.,

SpÃ©cification du produit

Heating temperature:600-1600C
Diameter:8-54mm
Length:240-4000mm
Material:Good quality green SiC powders

La description

1600C U Type Silicon Carbide Heating Elements (ISO9001)

VINER Industrial Silicon Carbide SiC heating elements are made from high-density, high-purity Silicon Carbide, which is the most popular type of economical heating element capable of operating under hot and rigorous environments.

VINER Industrial Silicon Carbide SiC heating elements U type Features:

1. Withstands as high as 1600C (surface temperature)
2. Generates high heat output per unit surface area, approximately 5-10 times than the output of Nichrome wire

3. High strength and excellent shock resistance

4. Heat source is free of noise and air pollution

VINER Industrial Silicon Carbide SiC heating elements U Type Advantage:

1. Selecting high purity green SiC powder, to ensure best foundation for top quality.

2. SiC heating elements are extruded by 500T press machine, to ensure high density uniform through whole length.

3. Excellent resistance rate between heat zone and cold zone, to avoid over-temperature of cold zone to damage furnace body.

4. Special technology to spread a protect film on the surface of hot zone, which enhance the Antioxidant property evidently and lengthen the service life.

VINER Industrial Silicon Carbide SiC heating elements SiC heater Specifications:

When you place an order of the VINER Industrial Silicon Carbide SiC heating elements, please give following information:

OD: Outer Diameter;

HZ: Length of Hot Zone;

CZ: Length of Cold Zone;

OL: total Length

Order Sample of the VINER Industrial SiC heater U type Silicon Carbide SiC heating elements

U type: OD=20mm, HZ=300mm, CZ=400mm, OL=700mm, A=60mm,

Resistance 2.24 Specify As: S-U,20/300/700/60/2.24

VINER Industrial Silicon Carbide SiC heater SiC heating elements Technical Parameters:

VINER Industrial Silicon Carbide SiC heater SiC heating elements U Type:

ED (Rod,Straight)type, Utype, Wtype, Ltype, Slottype,Single Spiral, Double Spiral, UX type

Notes for Using and Installing VINER Industrial SiC heater Silicon Carbide SiC heating elements:

1. Heater should be protected against damp during storing or installing to ensure the performance of the heater.

2. In order to be sure of well-distributed lod of each and groups, heater should be divided before assembling. The tolerance of the resistance of each one cannot exceed by 10% each other.

3. Heater is hard and brittle, please be careful when assem bling and maintaining so as to avoid damage.

4. When operating the electric furnace at the beginning, the voltage should be increased slowly and cannot be fully loaded at once. Otherwise the larger current will be resulted in the damage of heater

5. When heater is damaged and need to be changed, the resistance of new ne should follow the increasing resistance. If many are damaged or resistance increased too much, heater should be changed.

6. Silicon Carbide (SiC) heating elements is a non-metal electric heating element made from SiC as its main raw materials. It has some specific properties, such as low expansion coefficient, little deformation, stable chemical property, long service life, easy installation and maintenance, etc.

VINER Industrial Silicon Carbide SiC heater SiC heating elements Application:

VINER IndustrialSilicon Carbide (SiC) heating elements can usually make use for furnace which temperature from 600-1600. It can be directly used in an air atmosphere, without any protection atmosphere. It is extensively used in the fields of metallurgy, ceramics, glass, machinery, analysis test, semiconductor, science & research and so on.

VINER Industrial Packaging:

Plastic paper inside, Polyfoam filled, Wooden box outside.

Company Information

VINER Industrial specializes in SiC heating elements with ED (Rod, Straight) type, U type, W type, L type, Slot type, Single Spiral, Double Spiral, UX type and diameter 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 25mm, 30mm, 31.7mm (1.25inch), 35mm, 38.1mm (1.5 inch), 40mm, 44.4mm (1.75 inch) to 54mm (2.125 inch), 75mm (2.95 inch). Also different sizes and kinds of high temperature furnaces, such as Muffle Furnace, Vacuum Tube furnace, Vertical Tube Furnace, Rotary Tube furnace, Vacuum Crucible furnace, Vacuum Box furnace, Atmosphere Furnace, Bottom Loading furnace, and Vacuum Drying Oven, the chamber sizes could be according to customers' design.

What is more, VINER Industrialproduces and supplies high temperature Kiln Furnace Spare Parts including MoSi2/SiC/Resistance Wire heating elements, Ceramic Fiber Insulation, Alumina/Zirconia Ceramics, Silicon Carbide Ceramics, Boron Nitride (BN) Ceramics, Vacuum Flanges, Thermocouple, PID Temperature Controller, and Quartz Furnace Tube. Ps kindly inquiry us, we will try our best to serve you.

Welcome to visit manufacture line!!

Guaranteed Quality: Our SiC heating elements are warranted to be free from defects in materials or workmanship for 2 years from the date of purchase. Within this period, Across International will, at its sole options, replace any components that fail in normal use. Such replacement will be made at no charge to the customer for parts, provided that the customer shall be responsible for any transportation cost. This warranty does not cover consumables and failures due to abuse, misuse, accident or unauthorized alteration or repairs.

Sound after Sales Service:We provide sound after sales service. We provide 24 hours consultation service. We are ready to answer your consultations at any time.

Our Services

1. Your inquiry related to our products or prices will be replied within 24hours

2. Guarantee samples quality same as mass production quality

3. All our products have 2-years warranties.

4. Offering the support to solve the problem in the application or selling period.

5. Competitive prices based on same quality

FAQ

1. Can you accept OEM?

Yes! We can manufacture as per your request size.

2. Can you deliver the goods via our shipping agent?

Yes, we could help you make the delivery using your shipping agent

3. Can you supply sample:

We could like to give you suitable suggestion about the SiC heating elements according to your detail application.

4. What about your After-sales service:

We promise that we can change or refund products if there are any quality problem.

Pays:	China
N Â° de modÃ¨le:	VN-SC1600-U04
Prix FOB:	5.12 ~ 28.15 / Piece ( Negotiable ) (Negotiable) Obtenir le dernier prix
LocalitÃ©:	China
Prix de commande minimale:	5.12 per Piece
Commande minimale:	2 Piece
Packaging Detail:	In exporting wooden case
Heure de livraison:	5-8days
Capacité de Fournir:	40000 Piece per Month
Payment Type:	PayPal, Money Gram, Western Union, D/P, D/A, L/C, T/T
Groupe de produits :	SiC heating element