Prix FOB
Obtenir le dernier prix0.31 / Piece
|5040 Piece Minimum Order
Pays:
China
N ° de modèle:
732
Prix FOB:
0.31 / Piece Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
0.31 per Piece
Commande minimale:
5040 Piece
Packaging Detail:
12pcs per box; 12boxes per carton, that is 144pcs per carton Size of Carton:0.056cbm per carton 20GP
Heure de livraison:
20days
Capacité de Fournir:
50000 Piece per Day
Payment Type:
L/C, T/T
Groupe de produits :
Personne àcontacter han
Danfeng road, Hangzhou, Zhejiang
DESCRIPTION OF PRODUCT:
High Temperature RTV Gasket Maker
-One part component with special design to meet today's technology changes.
-It forms any size of shape gasket which is resistant to both high temperature and high pressure.
- Resists cracking, shrinking and migrating caused by thermal cycling.
-Withstands temperature from **0F up to **0F.
CHARACTERISTIC:
-High Temperature gasketing material designed primarily for use on aluminum, iron and steel flanged mating surfaces. Ideal for on-the-spot and emergency repairs, or when a conventional gasket is unavailable.
-Fills gaps up to .**5" and cures to a solvent resistant seal that will not tear or decay during service.
-Suggested applications: Water pumps, themostat housings, transmission pans and case covers, transaxle casings, o-ring replacement.
SURFACE PREPARATION:
-The silicone sealant should be
applied at a thickness not to exceed 6mm (1/4 in) from an exposed
edge.
-The recommended minimum joint dimension is 1/4" x 1/4" and the
maximum joint dimension is 1" x 3/8"..
-Ensure all surfaces that will be in contact with the sealant must
be clean, dry, free of dust , dirt, rust, oil and
other contaminants.
-Nonporous substrates should be clean with solvent and wipe dry
immediately with cloth before the solvent
evaporates from the surface. Porous surfaces should be roughen with
a stiff-bristled brush, rubbed down or
sandblasted.
-Cut off tip nozzle and cartridge. Screw n nozzle to cartridge.
-Fit into caulking gun, apply on surface in steady flow.
-If required, smooth and shape sealant with spatula dipped in mild
detergent.
-To remove excess uncured sealant with a mineral turpentine soaked
cloth. Fully cured excess sealant can be
removed by trimming with a sharp knife.
-Content fully cures in *8 hours.
SAFETY PRECAUTION:
Ensure good ventilation if used
indoors.
Contact of unvulcanised silicone sealant with eyes and mucous
membranes must be avoided as this will cause
irritation.
| Pays: | China |
| N ° de modèle: | 732 |
| Prix FOB: | 0.31 / Piece Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | 0.31 per Piece |
| Commande minimale: | 5040 Piece |
| Packaging Detail: | 12pcs per box; 12boxes per carton, that is 144pcs per carton Size of Carton:0.056cbm per carton 20GP |
| Heure de livraison: | 20days |
| Capacité de Fournir: | 50000 Piece per Day |
| Payment Type: | L/C, T/T |
| Groupe de produits : | RTV Gasket Maker |
