Prix FOB
Obtenir le dernier prix|
- Minimum Order
Pays:
China
N ° de modèle:
-
Prix FOB:
Localité:
-
Prix de commande minimale:
-
Commande minimale:
-
Packaging Detail:
-
Heure de livraison:
-
Capacité de Fournir:
-
Payment Type:
-
Groupe de produits :
Personne àcontacter han
Danfeng road, Hangzhou, Zhejiang
4 Minutes Rapid Epoxy
Steel and AB Glue is based on the room temperature, having
the features of:
(1) solidifying rapidly within 3-5 minutes,
(2) suitable for small parts and structural strength
(3) can be used after one hour
(4) quick set and high adhesive performance
(5) can be lacquered and waxed
(6) waterproof and chemical medium
(7) joint layer is clear and elastic
Using Method:
1.The surface should be clean and dry, without oil or
wax
2.Take down the cap, pierce the seal, squeeze out evenly
(A:B=1:1). cover the surface with glue based on the mixing
of the two components evenly,
3.Press it according to the actual condition.. it could
achieve the using intensity after the solidifying for one
hour during the normal temperature, it is suggested to
operate at above 5ºC
Warning:
1.It must be even for the mixing of the two components
during the adjusting of the glue. Quantity should not
excess to much.
2.Tighten the caps after usage .Do not mix the cap of part
A and B.
3.Wash the additional glue on the hands or the surfaces of
bonding materials by alcohol before its solidifying.
4.Avoid touching with the eyes and skin directly. If
getting touch with the skin, please wash them at once by
using of a cloth with dipping of alcohol before
solidifying, then, clean them by soap and warm water. If
getting touch with the eyes, please wash them immediately
with plenty of water, and see the doctor for serious
situation.
5.Take strict precautions against touching by the kids and
entering into the mouth.
Storage And Packing:
1.Stock the products with air-tight seal in the environment
of shade and dry. The shelf life is one year. It is
available to use based on passing of the test if being
beyond the shelf life.
2.Preserve and transport as non dangerous products.
3.Packing specification: 20g/card, in tube.
For more information please refer to our Website
Pays: | China |
N ° de modèle: | - |
Prix FOB: | Obtenir le dernier prix |
Localité: | - |
Prix de commande minimale: | - |
Commande minimale: | - |
Packaging Detail: | - |
Heure de livraison: | - |
Capacité de Fournir: | - |
Payment Type: | - |
Groupe de produits : | adhesive and sealant |