Prix FOB
Obtenir le dernier prix300000 ~ 3e+06 USD / Set ( Negotiable )
|1 Set Minimum Order
Pays:
China
N ° de modèle:
-
Prix FOB:
300000 ~ 3e+06 USD / Set ( Negotiable ) Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
300000 per Set
Commande minimale:
1 Set
Packaging Detail:
wooden case or as consumer require
Heure de livraison:
3 months after prepayment
Capacité de Fournir:
5 Set per Year
Payment Type:
L/C, T/T
Groupe de produits :
Personne àcontacter Ms. Julia
Lingang No.2 Road, Zhoushan, Zhejiang
Two sets of extruder are placed on live platform which can drive die go up and down. There are two guide rails which can help adjust the distance between die and pipes. Two sets of dies can move up and down according to different needs. Pipes can go directly through the die and AD & PE can wrap on the pipes uniformly.This can not only help save material, but also prevent roller from wearing.
However, since the coating line is running in linear way, the homogeneity of the powder coating may be affected, so this device is only suitable for the pipes with diameters under **0.In this type, die is side blew pipes and the adhesive and polyethylene press rollers are directly blew pipes. The AD extruder and PE extruder are placed vertically with production line. They can move back and forward (AD extruder can move laterally) to adjust the angle between coating layer and steel pipes
Two sets of extruder are placed on one side of production line. The extruder is vertical to production line. The extruders are placed on live platform and die and extruder can move up and down. Pressing roller and guide roller are separately placed on a live scaffold. This can help easily adjusting the extrusion and wrapping equipment according to different pipes and also adjusting the width of coating layer. It can not only ensure the uniformity of PE, but also save raw material.
Since the space under pipes is unlimited, pipe carrier can be installed under pipes. As a result, there is no need to use pipe connecting device. In the meanwhile, the cutting of rudder at the end of pipes can be achieved.
Steel pipe water spraying equipment
The water cooling system is used to cool heated piped rapidly to the temperature of *0℃**0℃, to protect its anticorrosion layer and protection layer.
Water cooling system consists of water cooling room, water cooling tower, self-prime pump, centrifugal pump, pipeline, etc. There is a back water pond near cooling room
Cutback machine
This device is used to remove pipe-end coating layer and then form a groove whose angle is below *0°, in order to joint easily.
It is double-head high-efficient cutback machine. It is composed of steel brush, polishing motor, moving trolley, high efficiency dust collector etc. It is also equipped with lifting rotation roller, rocker arm etc.| Pays: | China |
| N ° de modèle: | - |
| Prix FOB: | 300000 ~ 3e+06 / Set ( Negotiable ) Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | 300000 per Set |
| Commande minimale: | 1 Set |
| Packaging Detail: | wooden case or as consumer require |
| Heure de livraison: | 3 months after prepayment |
| Capacité de Fournir: | 5 Set per Year |
| Payment Type: | L/C, T/T |
| Groupe de produits : | pipe external coating |
