Jufengshuo Tianjin International Trading Co., Ltd

Stainless steel coil is a special type of steel coil used in a number of different applications within fabrication and manufacturing environments. Ste

1. Standards: API 5CT, ISO11960 2.Grade: J55, K55, N80, L80, C90, C95, P110 3. OD: 60.23-508.00mm 4. Thickness: 4.24-16.13mm 5. Delivery: Normally acc

Most people don't even notice structural tubing, but it is an integral part of everyday life for many people. This sturdy alternative to solid ste

Steel round bars is the universal name for a number of different steels used primarily for their anti-corrosive element. Stainless steel has been deve

A pipe is a tubular section or hollow cylinder, usually but not necessarily of circular cross-section, used mainly to convey substances which can flow

1. Standards: GB/T3091, BS1387, ASTM A53 2. Grade: Q195-Q345 3. OD:20-406mm 4. Thickness: 0.8-20mm 5. Delivery: Normally according to the order quanti

A steel sheet is a sheet of steel that has been galvanized in order to help prevent corrosion. Galvanized steel sheets can be used in a variety of app

PPGI is pre-painted galvanised iron, also known as pre-coated steel, coil coated steel, color coated steel etc, typically with a hot dip zinc coated s

1. Standards:GB/T14975-2002, GB/T14976-2002, GB13296-2007, ASTM A213, ASTM A269, ASTM A312, JIS G3459, DIN17458 2. Grade: 304, 304L, 304H, 316/316L, 3

Round Steel Bars/Rebar (short for reinforcing bar) is a common steel bar or mesh of steel wires commonly used as a tension device in reinforced concre

1. Standards:GB/T 8162, 8163, 3087, ASTM A53, ASTM A106, DIN1629, DIN 17175, JIS, BS, etc. 2.Grade: 304, 304L, 304H, 316/316L, 316Ti, 317, 317L, 321,

SUMMARY CH210Lcan extend and adjust cement slurry's thickening time. SPECIAL ATTENTIONS CH210L has a certain effect on strength of the set cement

1. Standards: GB9948-2006 GB/T9711.2-1999 2. Grade: 10# , 20# , 45# , 15CrMo, 1Cr2Mo, 1Cr5, st35, st45, st52, st55 3. OD: 8-630mm 4. Thickness: 1-6

CH210S can extend and adjust cement slurry thickening time. CH210S includes CH210S-P high purity type and CH210S standard type. Standard type CH210S i

SUMMARY CA910 is a kind of highly effective early strength accelerator to make cement slurry curing time be effectively shortened. Set cement slurry e

CG610Lslurry system is applicable in a wide temperature range and it's resistant to high temperature. CG610L has salt resistance. It's efficie

CG610S is applicable of wide temperature range and it s resistant to high temperature. CG610S has salt resistance. It s efficient in saturat

CH510S-D can extend and adjust the cement slurry's thickening time. CH510S-D has good top strength when it is used in long formation sealant of we

Standard: ASTM SA106, ASTM SA210, DIN17175-79, GB5310-2008 Grade: 20#, ASTM SA106B/C, ASTM SA210A/C, ST45.8-III Outer diameter: 8mm-1240mm Thickness:

Standard: ASTM/DIN/JIS/GB Grade: ASTM A210 A1, DIN 17175 ST 45.80, JIS G3401, STB 340/STB410, GB3087-1999 10#/20# Outer diameter: 8mm-1240mm Thickness

API 5L Line pipe (B/X42/X52/X60 steel grade) Out Diameter: 8" to 36" (219mm-914mm) Thickness: 6mm-50mm.

1. Standards:GB/T8163-2008, ASTM A106/A53, Gr.B, API5L, DIN, JIS, etc. 2. Grade: 10#, 20#, 35#, 45#, 15CrMo, 12Cr1MoV, 27SiMn, ASTM A53, A53B, SA53A,

1.Standards: GB/T8162-2008, ASTM A53, ASTM A106 2.Grade: 10#, 20#, ASTM A106A, B, C A53A, B 16Mn(Q345A.B.C.D.E) 3.OD: 8-1240mm 4.Thinkness: 1-200mm 5

1. Standards: GB/T8162-2008, GB/T17396-2009, ASTM A53 2. Grade: 10#, 20#, A53A, B 16Mn(Q345A.B.C.D.E) 3. OD: 8-1240mm 4. Thickness: 1-200mm 5. Delive

Standards: ASTM A500 Grade: ASTM A500 Gr. A, B, ASTM A36, SS400, S235, S355, St37 OD 8-219mm Thickness: 0.3-12mm

Standards: ASTM A500 Grade: ASTM A500 Gr. A, B, ASTM A36, SS400, S235, S355, St37 OD 8-219mm Thickness: 0.3-12mm

Standards: ASTM A500 Grade: ASTM A500 Gr. A, B, ASTM A36, SS400, S235, S355, St37 OD 8-219mm Thickness: 0.3-12mm

Standards: ASTM A500 Grade: ASTM A500 Gr. A, B, ASTM A36, SS400, S235, S355, St37 OD 8-219mm Thickness: 0.3-12mm

1. Standards: BS1387, GB/T3091, GB/T9711, DIN1626, ASTMA53-2007, API 5L 2. Grade: 10#, 20#, A53A, B 16Mn(Q345A.B.C.D.E) 3. OD: 8-1240mm 4. Thickne

1. Standards: API 5CT, ISO11960 2. Grade: J55, K55, N80, L80, C90, C95, P110 3. OD: 60.23-508.00mm 4. Thickness: 4.24-16.13mm 5. Delivery: Normall

1. Standards: ISO2531 2. Grade: K8/K9/K12 3. DN: 80~2200 mm 4. Thickness: 6mm-27.9mm 5. Delivery: Normally according to the order quantity or upon

Place of Origin: China Brand Name: Jufengshuo Model Number: C12200 Item: copper tube , brass tube , bronze tube, red copper tube Shape: Round, Square

Specification for copper wire scrap: 1. Purity: 99.9% MIN 2. Grade: Grade A 3. Type: Copper wire/copper granules 4. Advantage: High purity, very c

1.Standards:GB5310-2008, GB6479-2000, GB9948-2006, DIN17175-79, ASTMSA335, ASTMSA213, JISG3467-88, JISG3458-88 etc. 2. Grade: 10#, 20#, 35#, 45#, 16-5

1. Standards: GB/T18984-2003, ASTM A333 2. Grade: 16MnDG, 10MnDG, 09DG, 09Mn2VGDG, 06Ni3MoDG, ASTM A333Grade1-11 3. OD: 8-1240mm 4. Thickness: 1-200mm

Standards: ASTM, GB, EN, JIS, DIN, ABS, LR, BV, DNV, NK, GL, CCS Grades: ASTM A36, Q235, Q345, SS400, St52-3 Q390B-D, Q420B-D, Q460C-D, S235JR, S355JR

Standard: GB, , JIS, AISI/ASTM, DIN, BS, NF, OCT Grade:304, 304L, 321, 301, 302, 310, 316, 316L Thickness: 0.25mm---3mm Delivery: Normally according t

Standards:ASTM, GB, EN, JIS, DIN, ABS, LR, BV, DNV, NK, GL, CCS and tec. Grades:ASTM A36, Q235, Q345, SS400, St52-3 Q390B-D, Q420B-D, Q460C-D, S235JR

SUMMARY CG610S-P effective content is high while dosage is low. CG610S-P slurry system is applicable of wide temperature range and it's resistant

SUMMARY CG510L is applicable of wide temperature range and it's resistant to high temperature. CG510L has salt resistance. It's efficient in 1