Zhuji Ciwu Kaida Hardware Appliances Factory

using the conditions: Altitude 1000m Humidity: -20 -50 Relative Humidity: 45% -95% Voltage Range: AC 176V-245V

1, will need to weld the pipe into the same type of fixture, the clamp; 2, the pipe ends with a dresser milling. In the milling side, avoid too much f

using the conditions: Altitude 1000m Humidity: -20 -50 Relative Humidity: 45% -95% Voltage Range: AC 176V-245V

PE on the welder from the hydraulic station, electric cutters, racks, heating plate four major components. Operation: Please check before use 1, a

PE on the welder from the hydraulic station, electric cutters, racks, heating plate of four major components Operation: Please check before use 1,

using the conditions: Altitude 1000m Humidity: -20 -50 Relative Humidity: 45% -95% Voltage Range: AC 176V-245V

1 Fixed fuser heating installation ends, the fuser is placed in the shelves, according to the provisions required to install the corresponding heat pi

1, will need to weld the pipe into the same type of fixture, the clamp; 2, the pipe ends with a dresser milling. In the milling side, avoid too much f

using the conditions: Altitude 1000m Humidity: -20 -50 Relative Humidity: 45% -95% Voltage Range: AC 176V-245V

using the conditions: Altitude 1000m Humidity: -20 -50 Relative Humidity: 45% -95% Voltage Range: AC 176V-245V