WGQH series of high voltage solid soft starter

The color of the cabinet is based on your requirement.

If there is any special requirement, please contact us for an order.
 

Working conditions

Environment temperature: －*0℃~＋*0℃

Relative air humidity: ≤*0%

Altitude: ***0m (if higher than that, special design can be made for the unique condition.)

Working voltage is no more than **0% of the rated voltage.

Power frequency: *0Hz±2Hz

The main circuit is equipped with component-based structure, modularized installation method, which can reach the target of multiple over-voltage absorption and protection. This device can multiply limiting the clamp of transient dv/dt, lighting impulse voltage, operation wave over-voltage and that of transient transition process. It has unique measures and methods to reach pressure balancing of di/dt, valve recanalizing and turn-off.

Different current intensities are isolated perfectly. The system adopts high anti-interferential digital contactor, matched with fiber/CT isolation transforming technology, which helps to avoid interference of each current, making the high voltage performance is as reliable and safe as low voltage devices.

The specially designed fault detection return and judging system can pass the detecting result to the control circuit in time and start the sound and light alarm, and then it will take corresponding measures to protect the equipment from expending.

It has a high effect of over *6%(top to *7%), which is far effective than other soft starters.

It can perfectly protect the stator and motor from faults like short circuit, over-current, current limiting, over-voltage, under-voltage, overload, open-phase, 3 phases current unbalance, overheat, communication fault.

Unique heat dissipation design can effectively cool the thyristor.

The device has several selectable starts like standard start, constant current start, double voltage harmonic start, start with sudden jump, etc.

General introduction

Widely used abroad, WGQH high voltage solid soft starter is a new type high voltage motor soft starter which is mainly suitable to high and medium voltage squirrel-cage AC motor under *0KV. It adopts DSP controlling technique, power and electron technique and technique of multiple SCR series/parallel to monitor and protect the motor completely. Compared with traditional starting methods, this device has the unique intelligent controlling way, which is able to set the starting parameters as torque, current, time of start and stop as well as connecting to computer/PLC to reach a network controlling. High voltage solid soft starter has other advantages such as small volume, low consumption, high reliability, non-contact, maintains free, no pollution, convenient installation, etc. It is now widely used in industry like mechanical manufacture, cement, metallurgy, mining, oil production, chemical industry, water treatment, petrochemical industry, and on loads of pump, blower, pumping unit, air compressor, ball mill, crane, compressor, crusher, conveyer, elevator, centrifuge, rolling mill, and so on.