Brief introduction：

Waterproof and insulation coating for metallic roof is a waterproof coating special for metallic roof which is made by liquid high quality acrylate and silane elasticity of copolymerization emulsion、various kinds of auxiliaries、and ultraviolet reflected materials.This waterproof system has excellent effect on reflecting ultraviolet、ageing resistance and low temperature resistance.It also does work on indoor temperature reducing,so as to achieve the result of waterproof and  energy saving.

Main features：

1,UV reflectivity,Roof base surface temperature reduce,anti-aging,low temperature resistance,and long shelf life.

2,Water-based emulsion, non-toxic and harmless,environmental friendly product.

3,With better film elongation,this product can adapt to base shrinkage and crack deformation.

4,Cold construction,color additives can be added;Easy to construct and maintain.

5,Good metal adhesion,will not afford a drum and fall.

Packing：

â‘ *0kg/plastic cask

â‘¡*0kg/plastic cask
 

Where to use：

*Exposed and non exposed roofs

*Indoor and outdoor waterproofing

*Waterproofing maintenance for roof

*Waterproofing maintenance for metal roofing and heat insulation

How to use：

1. Pour the liquid material into the container, then stir the powder into it. Keep stirring until it generate the mortar which is no powder block and smooth, and finish in the operating time.

2. Using stick, brush or rubber scraper to brush the mortar onto the base which has been treated evenly. You should brushing two layers or over according to the using environment and performance requirement.

3. In order to avoid the slurry accumulated too thick, you must use scraper to repair the uneven spot.

4. After finish brushing the first layer, you must wait for, when it has a little dry, then you can brush the second layer. If the first layer of brushing time has been over *4 hours, or the coating has been cured, you must use water to humidify the first coating, and then you can brush the second coating on it.