Prix FOB
Obtenir le dernier prix|
480 Kilogram Minimum Order
Pays:
China
N ° de modèle:
TY-6638N
Prix FOB:
Localité:
-
Prix de commande minimale:
-
Commande minimale:
480 Kilogram
Packaging Detail:
Packed in 15kg (N.W.) metal drum.
Heure de livraison:
Within 20 working days
Capacité de Fournir:
-
Payment Type:
T/T
Groupe de produits :
-
Personne àcontacter Ms. Janice
No.399, Xiasheng Road, the Second Chemical Industrial Park, Jinshan District,, Shanghai, Shanghai
Brief Introduction
TY****8N is oil-based one-component PU adhesive. It is mainly used
for laminating bra foam pad, mold cup etc, also applied to the
bonding of textile fabric, PVC, ABS etc materials.
Performance Features
Good adhesion and high bonding strength
Excellent resistance to chemical, aging and water
Good flexibility
Good resistance to low and high temperature
Good yellowing resistance
Technical Indexes
Appearance:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
 Colorless to pale yellow liquid
Solid
Content:Â Â Â Â Â Â Â Â Â Â Â Â Â
*6±1%
Solubility:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
Soluble in ketone solvents
Viscosity:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
******0mPa·s/*5℃
Hydrolytic Resistance:Â Excellent
Boiling Point (Solid):    About *0℃
Melting Temperature:  > **0℃
Adhesive Quantity:     ****0g/m²
Drying
Time:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
****0s
Application Instructions
1. This product is quick-drying hot melt adhesive, by heating to
melt after the adhesive layer is dried(the recommended mold
temperature is **0℃) then bonding. If the molding temperature is
too high, finished product will be easy to debond. According to the
thickness of foam, setup different molding temperature and molding
time.
2. This product is suitable for spraying, roller coating. The
appropriate caliber of spray gun is 1.**2.0mm and the pressure
should not be less than 4kg, depending on different demands.
3. If product viscosity is too large, the proper amount of ketone
solvents or banana oil can be added for dilution.
4. When do the spraying, choose appropriate spraying distance
according to requirement. The adhesive appears punctiform if the
spray gun is close to the coated surface; if far away it appears
filiform.
5. If the higher bonding strength or better heating resistance is
required, 2%*5% isocyanate curing agent (*0% content) can be added.
But it may not restore after lamination and depending on the amount
of curing agent dosage.
Safety Measures
TY****8N is in compliance with the general chemical protection
measures. Keep good ventilation in working environment, wear
appropriate skin protection device and goggles in the process of
using. If skin contacts with this product, wash the skin with water
and soap. If eyes contact, irrigate copiously with plenty of clean
and fresh water. In case of severe case, immediately seek for
medical advice.
Storage and Transportation
This product should be transported in well-sealed packaging to
avoid intense collision and sudden hot. Store in a well ventilated
place and keep it away from fire. The appropriate storage
temperature should be above 5℃ in winter, crystallization may
occur if below 0℃. It can be used after being heated and stirred
(suggest heating by hot water but firing is not allowed), does not
effect the performance, valid for half a year.
| Pays: | China |
| N ° de modèle: | TY-6638N |
| Prix FOB: | Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | - |
| Commande minimale: | 480 Kilogram |
| Packaging Detail: | Packed in 15kg (N.W.) metal drum. |
| Heure de livraison: | Within 20 working days |
| Capacité de Fournir: | - |
| Payment Type: | T/T |
| Groupe de produits : | - |
