Prix FOB
Obtenir le dernier prix( Negotiable )
|480 Kilogram Minimum Order
Pays:
China
N ° de modèle:
NEL-9100
Prix FOB:
( Negotiable ) Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
-
Commande minimale:
480 Kilogram
Packaging Detail:
Packed in 15kg(N.W.) metal drum.
Heure de livraison:
Within 20 working days
Capacité de Fournir:
-
Payment Type:
T/T
Groupe de produits :
-
Personne àcontacter Ms. Janice
No.399, Xiasheng Road, the Second Chemical Industrial Park, Jinshan District,, Shanghai, Shanghai
Brief Introduction
NEL****0 is oil-based one-component PU adhesive. It is mainly
applied to the lamination of bra foam pad, mold cup etc. Also for
the bonding of textile fabric, PVC, ABS etc materials.
Â
Performance Features
Good adhesion and high bonding strength
Excellent resistance to chemical, aging and water
Good flexibility
Good resistance to low and high temperature
Good yellowing resistance
Â
Technical Indexes
Appearance:Â Â Â Â Â Â Â Â
Colorless to pale yellow liquid
Solid Content:      *6±1%
Solubility:Â Â Â Â Â Â Â Â Â Â
Soluble in ketone solvent
Viscosity:Â Â Â Â Â Â Â Â Â Â
******0mPa·s/*5℃
Hydrolytic Resistance: Excellent
Boiling Point (Solid): About *0℃
Melting Temperature: > **0℃
Adhesive Quantity:  ****5g/m²
Drying Time:Â Â Â Â Â Â Â ****0s
Â
Application Instructions
1. This product is quick-drying hot melt adhesive, by heating to
melt after the adhesive layer is dried(the recommended mold
temperature is **0℃) then bonding. If the molding temperature
too high, finished product will be easy to debond. According to
the thickness of foam, setup different molding temperature and
molding time.
2. This product is suitable for spraying, roller coating. The
appropriate gun caliber is 1.**2.0mm and the pressure should not
be less than 4kg, depending on different demands.
3. If product viscosity is too large, the appropriate amount of
ketone solvents or banana oil can be added for dilution.
4. When do the spraying, choose appropriate spraying distance
according to requirement. The adhesive appears punctiform if the
spray gun is close to the coated surface; If far away it appears
filiform.
5. If the higher adhesion strength or better heat resistance is
required, 2%*5% isocyanate curing agent (*0% content) can be
added. It may not restore after bonding and depending on the
amount of curing agent dosage.
Â
Safety Measures
NEL****0 is in compliance with the general chemical protection
measures. Keep good ventilation in working environment, wear
appropriate skin protection device and goggles in the process of
using. If skin contacts with this product, wash the skin with
water and soap. If eyes contact, irrigate copiously with plenty
of clean and fresh water. In case of severe case, immediately
seek for medical advice.
Â
Storage and Transportation
This product should be transported in well-sealed packaging to
avoid intense collision and sudden hot. Store in a well
ventilated place and keep it away from fire. The appropriate
storage temperature should be above 5℃ in winter,
crystallization may occur if below 0℃. It can be used after
being heated and stirred (suggest heating by hot water but firing
is not allowed), does not effect the performance, valid for half
a year.
| Pays: | China |
| N ° de modèle: | NEL-9100 |
| Prix FOB: | ( Negotiable ) Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | - |
| Commande minimale: | 480 Kilogram |
| Packaging Detail: | Packed in 15kg(N.W.) metal drum. |
| Heure de livraison: | Within 20 working days |
| Capacité de Fournir: | - |
| Payment Type: | T/T |
| Groupe de produits : | - |
