Prix FOB
Obtenir le dernier prix|
20MTS Minimum Order
Pays:
China
N ° de modèle:
YS-A1
Prix FOB:
Localité:
Shanghai
Prix de commande minimale:
-
Commande minimale:
20MTS
Packaging Detail:
-
Heure de livraison:
-
Capacité de Fournir:
10, 0000MTS
Payment Type:
-
Groupe de produits :
-
Personne àcontacter Mr. Sky
146 Kanghua Road, Minhang, Shanghai
Tile Adhesive
Features
1. Well water-protective; Don't need
to soak the brick and wall to improve work efficiency.
2. Excellent adhesion, both to the wall and to the paint.
3. Maximum protection against leakage caused by moisture
saturation; Excellent resistance to corrosion.
4. Excellent elasticity, shrinking-free, no bubbles;
5. Its 3 times working speed than the traditional working way.
6. Convenience to use; Non-toxic
Surface preparation
All surfaces must be
structurally sound, dry, clean and free from movement, oil, grease,
wax, curing compounds and any other loose or contaminating
materials.
Stir and mix
Add clean water to a bucket, then
slowly add tiles powder to the water. Stir the mix with electrical
drill-mixer until a lump-free consistency is achieved. Allow the
mix to stand for 3 to 5 minutes. Re-stir then use the tile
adhesive. The mixing ratio is *5 kg powder to 7 liters of
water.
Application
Scrape the mixing(thickness is
about 3mm) on the surface with scraper; Each scraping area is about
1 square meter; Then use scraper(*0mm**0mm) to cut the surface to
rack gear shape. Scrape the mixing(about 3mm) on tile; If there is
deep lines or slot, tile adhesive should be added on the back of
the tiles.
Precautions
1. Make sure vertical and
horizontal veracity of the surface before working.
2. The tiles must be sticked on the surface within drying time.
3. Must adjust the tile within adjusting time.
4. Dispose redundant tile adhesive before hardening.
5. The floor should be opened to light foot traffic or grout after
*4 hours following the process.
6. Dont apply tile adhesive in temperatures above *0 degree or
below 5 degree.
7. Dont allow the adhesive to skin prior to laying the tile. If the
adhesive skins, remove and dispose of it, then re-apply fresh
adhesive.
Remark
Main ingredient: Concrete macromolecule
polymer
Package: *5kg/ bag
Storage: Shelf life is minimum 1 year when stored in covered And
dry environment.
| Pays: | China |
| N ° de modèle: | YS-A1 |
| Prix FOB: | Obtenir le dernier prix |
| Localité: | Shanghai |
| Prix de commande minimale: | - |
| Commande minimale: | 20MTS |
| Packaging Detail: | - |
| Heure de livraison: | - |
| Capacité de Fournir: | 10, 0000MTS |
| Payment Type: | - |
| Groupe de produits : | - |
