Prix FOB
Obtenir le dernier prix100 ~ 500 / Piece
|1 Piece Minimum Order
Pays:
China
N ° de modèle:
2.0m X 1.2 M X 1.0m
Prix FOB:
100 ~ 500 / Piece Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
100 per Piece
Commande minimale:
1 Piece
Packaging Detail:
bubble bag and carton
Heure de livraison:
bubble bag and carton
Capacité de Fournir:
500 Piece per Week
Payment Type:
T/T, Western Union
Groupe de produits :
Personne àcontacter coco
Floor 2, A2 Block, AoHua Industrial Park, DaLang HuaRong Road, LongHua Town,, Shenzhen, Guangdong
LOW
VOLUME PREPRODUCTION OF COMPLEX
DESIGNS
KAIAO Technicians quickly make
Master Patterns and within a few days make Silicone Molds to be
used for casting PU products. Compared to Plastic Injection
Molding, Vacuum Casting is an Rapid Prototyping which can save time
and money. The life of the Silicone Mold is directly related to the
complexity of the part being cast. Silicone Molds will generally
produce *5 to *0 parts before Degradation. Average cure times: (1
to 4 hours for small parts and 4 to 8 hours for big
parts).
At KAIAO, innovation and creative efforts are always
ongoing so that we can find better ways to improve our production
processes. We believe in implementing our successful Silicone
Tooling techniques and Vacuum Casting methods which are recognized
by our clients.
Over Molding is an advanced process of casting
around and/or through Cores that are inserted into the Cavities of
Molds, resulting in the production of Individual parts made of
multiple materials. Typically, a soft PU Resin is cast around
and/or through a hard PU Resin to produce one part with two
different Durometers and Colors. Additionally, transparent parts
such as PMMA lenses can be cast directly into housings. This
process allows for Hand Held products and Electronic Devices to be
manufactured to meet (Vibration Minimizing, Impact Resistant, and
Water Resistant) Functional Requirements.
Metal Part Inserting is a mechanical process where
PU Resins are cast around and/or through Metal Parts that have been
inserted into Mold Cavities to produce INMOLD ASSEMBLED PARTS.
Machined Metal Parts, Stamped Metal Parts, Cast Metal Parts, as
well as Brass Inserts can all be Over Molded to improve the
mechanical strength, durability, and usability of parts with
Functional Requirements.
Melt Molding is a special process where Cores are
cast using Wax or Low Melt Temperature Alloys. These Cores are then
placed inside the Mold Cavities. The Over Molded Parts are removed
from the Molds with the Cores still inside. The Cores are then
melted out using a heat gun and/or hot water. Through this process,
complex radiator pipes and corrugated tubing can be custom
manufactured.
The Coloration of Cast Parts is a creative process
where Colors are added directly into the PU Resins to make INMOLD
COLORED PARTS. To Achieve INMOLD Texture and Gloss, we apply 2K
paint onto the surface of the Master Patterns, which is copied into
the Silicone Tool, allowing for parts to be produced with minimal
Post Production Finishing and are similar to Plastic Injection
Molding.
Â
| Pays: | China |
| N ° de modèle: | 2.0m X 1.2 M X 1.0m |
| Prix FOB: | 100 ~ 500 / Piece Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | 100 per Piece |
| Commande minimale: | 1 Piece |
| Packaging Detail: | bubble bag and carton |
| Heure de livraison: | bubble bag and carton |
| Capacité de Fournir: | 500 Piece per Week |
| Payment Type: | T/T, Western Union |
| Groupe de produits : | cnc |
