Prix FOB
Obtenir le dernier prix100 ~ 500 USD / Piece
|1 Piece Minimum Order
Pays:
China
N ° de modèle:
2.0m X 1.2 M X 1.0m
Prix FOB:
100 ~ 500 USD / Piece Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
100 per Piece
Commande minimale:
1 Piece
Packaging Detail:
bubble bag and carton
Heure de livraison:
bubble bag and carton
Capacité de Fournir:
500 Piece per Week
Payment Type:
T/T, Western Union
Groupe de produits :
Personne àcontacter coco
Floor 2, A2 Block, AoHua Industrial Park, DaLang HuaRong Road, LongHua Town,, Shenzhen, Guangdong
LOW
VOLUME PREPRODUCTION OF COMPLEX
DESIGNS
KAIAO Technicians quickly make Master Patterns and within a few
days make Silicone Molds to be used for casting PU products.
Compared to Plastic Injection Molding, Vacuum Casting is an Rapid
Prototyping which can save time and money. The life of the Silicone
Mold is directly related to the complexity of the part being cast.
Silicone Molds will generally produce *5 to *0 parts before
Degradation. Average cure times: (1 to 4 hours for small parts and
4 to 8 hours for big parts).
At KAIAO, innovation and creative efforts are always ongoing so
that we can find better ways to improve our production processes.
We believe in implementing our successful Silicone Tooling
techniques and Vacuum Casting methods which are recognized by our
clients.
Over Molding is an advanced process of casting around and/or
through Cores that are inserted into the Cavities of Molds,
resulting in the production of Individual parts made of multiple
materials. Typically, a soft PU Resin is cast around and/or through
a hard PU Resin to produce one part with two different Durometers
and Colors. Additionally, transparent parts such as PMMA lenses can
be cast directly into housings. This process allows for Hand Held
products and Electronic Devices to be manufactured to meet
(Vibration Minimizing, Impact Resistant, and Water Resistant)
Functional Requirements.
Metal Part Inserting is a mechanical process where PU Resins are
cast around and/or through Metal Parts that have been inserted into
Mold Cavities to produce INMOLD ASSEMBLED PARTS. Machined Metal
Parts, Stamped Metal Parts, Cast Metal Parts, as well as Brass
Inserts can all be Over Molded to improve the mechanical strength,
durability, and usability of parts with Functional
Requirements.
Melt Molding is a special process where Cores are cast using Wax or
Low Melt Temperature Alloys. These Cores are then placed inside the
Mold Cavities. The Over Molded Parts are removed from the Molds
with the Cores still inside. The Cores are then melted out using a
heat gun and/or hot water. Through this process, complex radiator
pipes and corrugated tubing can be custom manufactured.
The Coloration of Cast Parts is a creative process where Colors are
added directly into the PU Resins to make INMOLD COLORED PARTS. To
Achieve INMOLD Texture and Gloss, we apply 2K paint onto the
surface of the Master Patterns, which is copied into the Silicone
Tool, allowing for parts to be produced with minimal Post
Production Finishing and are similar to Plastic Injection
Molding.
ÂÂ
| Pays: | China |
| N ° de modèle: | 2.0m X 1.2 M X 1.0m |
| Prix FOB: | 100 ~ 500 / Piece Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | 100 per Piece |
| Commande minimale: | 1 Piece |
| Packaging Detail: | bubble bag and carton |
| Heure de livraison: | bubble bag and carton |
| Capacité de Fournir: | 500 Piece per Week |
| Payment Type: | T/T, Western Union |
| Groupe de produits : | cnc |
