Prix FOB
Obtenir le dernier prix|
300 Piece Minimum Order
Pays:
China
N ° de modèle:
RP7432
Prix FOB:
Localité:
China
Prix de commande minimale:
-
Commande minimale:
300 Piece
Packaging Detail:
Color Box
Heure de livraison:
Within a month
Capacité de Fournir:
20000 Piece per Month
Payment Type:
T/T
Groupe de produits :
Personne àcontacter Mr. Benny
Luqiao,pengjie, Taizhou, Zhejiang
Description
:
1. Twin hammer mechanism has 2
identical hammers that deliver an instantaneous balanced blow,
reducing vibration and transferring more torque to the drive end of
the anvil than any other mechanism on the market.
2. hammer mechanism provides more power and smooth balanced
blows
3.(screemed filter) air inlet keeps dirt and debris from damaging
the tool.
4.Twin hammer impact wrench is designed for tire shop, suspension,
frame and other heavy duty automobile work.
5.1/2" Air lmpact Wrench Rear exhaust
6.Recommended air pressure 6.5KG/CM2(*0 PSI)
Â
Air Tools Trouble Shooting:
| Air tools runs at normal speed, but loses under load |
1.Motor parts worn 2.Cam cluth worn or sticking due to lack oflubricant                        |
1.Lubricating clutch housing. 2.Check for excess clutch oil. 3.Clutch cases need only be half full Overfilling 4.Can cause drag on high speed clutch parts,is a typical oiled/lubricated wrench requires 1/2Â ounce of oil |
| Air tools runs slowly, Air flows slightly from exhaust |
1.Air tools's motor parts jammed with dirt particles 2.Power regulator in closed position Air flow blocked by birt |
1.Check air inlet filter for blockage. 2.Pour air tools lubricating oil into air inlet as per instructions. 3.Operate tool in short bursts quickly reversing rotation back and forth where applicable.Repeat above as needed.Air |
| Air tools will not run, Air flows freely from exhaust | 1.One or more air tools's motor vance stuck due to material build up |
1.Pour air tools lubricating tool into air inlet 2.Operate tool in short bursts of forward and/or reverse rotation where applicable 3.Tap motor housing gently with plastic mallet 4.Disconnect supply. Free motor by rotating drive shank manually where applicable |
| Air tools will not shut off | 1.Air tools's "O" rings throttle valve dislodged from seat inlet valve | 1.Replace air tools's"O" ring |
| Pays: | China |
| N ° de modèle: | RP7432 |
| Prix FOB: | Obtenir le dernier prix |
| Localité: | China |
| Prix de commande minimale: | - |
| Commande minimale: | 300 Piece |
| Packaging Detail: | Color Box |
| Heure de livraison: | Within a month |
| Capacité de Fournir: | 20000 Piece per Month |
| Payment Type: | T/T |
| Groupe de produits : | Air Tools |
